Reflex

Disabled USB ports

USBHub2x4 - Changing Default Downstream Port State to DISABLED

Post date: 1 year 2 months ago
Many customers have found the Acroname USBHub2x4 useful in production environments, but in some cases, when the hub is powered up/booted it may be best if the downstream ports are NOT enabled. This is particularly useful for cases when there are networking address collisions between the downstream...
Reading a Potentiometer using Reflex

Reading a Potentiometer using Reflex blog post

Post date: 9 years 10 months ago
OVERVIEW Potentiometers are commonly used in applications where accurate manual adjustment of a setting is required.  The potentiometer changes its resistance depending on the location of the knob, causing a change in voltage that can be read and used to change a value.  This example demonstrates...
Reading a Photoresistor using Reflex

Reading a Photoresistor using Reflex blog post

Post date: 10 years 7 months ago
OVERVIEW Photoresistors are used in many applications because they either increase or decrease in resistance depending on the amount of light.  A common application for photoresistors is the triggering of an event when the light passes a certain point.  This example demonstrates the use of a...
Subscribe to Reflex