- 1 of 4
- next ›
The LightWare LW20 is a very small form factor, 100m range laser sensor in an IP67 enclosure suitable for small drones and self-driving vehicles.
OmniPreSense OPS241-A is complete short-range radar (SRR) solution providing motion detection, speed and direction reporting. All radar signal processing is done on board and a simple API reports the processed data.
Open frame version of the LW20, the SF20 is a small form factor, 100 meter range laser sensor suitable as original equipment in drones and other products where fast, accurate distance measurement is required.
- LightWare SF20 (100m)
Time of Flight Camera (TOF) with full VGA resolution (640x480), 40fps frame rate, Gigabit Ethernet, IP65 and 67 case and NEMA 5 cable kit.
- Fotonic G-Series TOF Cameras
Scanse Sweep scanning LiDAR sensor with 40m range, 1000 samples/second sample rate, 360 degree field of view and 1-10Hz adjustable rotation frequency. Designed to bring powerful 360 degree sensing capabilities to everyone at an affordable price.
- Scanse Sweep V1 Scanning LIDAR
The LightWare SF11/C is a long range (0-120m), light weight laser altimeter designed for above-ground-level measurement from UAVs (multi-copter or fixed wing). It is directly compatible with Pixhawk flight controllers.
- LightWare SF11/C (120 meter)
Hokuyo UTM-30LX-EW scanning laser range finder with an extended sensing range to 30 meters. Interface is Ethernet and scanning rate is 25 milliseconds across a 270° range.
Hokuyo scanning laser range finder with USB 2.0 interface, 270˚ field of veiew, 0.25˚ angular resolution, 0.1 to 30m range, ±10mm accuracy, 1mm resolution, and a 40Hz scan rate.
The UST-20LX is a scanning laser range finder with a .02 to 20 meter range. The sensor's interface is Ethernet. Scanning rate is 25 milliseconds across a 270° range. A 12/24VDC power source is required.
Sharp long range infrared distance sensor makes continuous distance readings and outputs an analog voltage proportional to a target's range. Working range of 100 cm to 550 cm (~3 ft to 18 ft). 5-pin JST connector and all wiring included.
Sharp infrared distance sensor makes continuous distance readings and returns a logic value corresponding to object detection within a pre-set range of 24 cm (9.45 in).