To Your Basket Ordering Information Part Number: R298-1T-SERVO Price: $18.00 Weight: 0.20 lbs A great servo for robotic heads and turrets. This GW servo can pivot a full 360 degrees and has about twice the available torque of our standard servo. This servo comes with the servo horn shown and horn mounting hardware.

More Details:

The 1T servo can be swept a full 360 degrees, and has 100 oz-in of torque. With a 1.3 second sweep time from 0 to 360 degrees, this servo is ideal for small robotic heads and sensor turrets to provide full situational awareness. Dual ball bearings for shaft support provide smooth and fluid motion.

This is a standard, rather than continuous rotation, servo. See our servo article for a comparison of standard and continuous servo operation.

This servo comes with a 2-inch circular horn which can be epoxied to a head or turret. The servo has a Hitech/JR connector which mates directly with a 0.1" 3-pin header.

The servo spline has 25 teeth and mates with Futaba compatible accessories.

Wiring Interface:

The color layout of the wires for the 1 Turn servo is standard white-red-black. The white wire is the signal wire, the middle is 4.8 to 6V power, and the black is ground, as seen above.

Dimensions:

All dimensions are in inches.

Related Links:

Comparing and Explaining the Acroname Servos