USB-C 20Gbps Universal Orientation Cable (VCONN Passthrough Test Cable)
Price
$70.00
MSRP
$95.00
You Save Percentage
26%
The USB-C Coaxial Universal Orientation Cable (UOC) enables automated testing of flipping USB-C connections. When used with the USB-C-Switch or USBHub3c, this cable provides an orientation-agnostic connection. It is built with low-loss coaxial wires for the USB SuperSpeed data lines to ensure the highest possible signal integrity in your USB-C test system. C46-USBC-UOC is a specialized USB-C UOC cable used for flip testing of USB-C end devices (cameras, flash drives, development boards) which short the USB 480Mbps A and B side D+/D- lines at the USB-C connector. Products which implement fully separated D+/D- connections for each side of the USB-C connector should use the C44-USBC-UOC.
SKU:
C46-USBC-UOC Manufactured by
Acroname, Inc.
in
China
FIND THE RIGHT USB-C CABLE FOR YOUR NEEDS:
C44-USB-UOC | C45-USBC-COAX | C67-USBC-UOC | C49-USBC-1SCREW-DUAL | C58-USBC-1SCREW-SINGLE | C59-USBC-C | |
---|---|---|---|---|---|---|
Speed (SS) | ≥20Gbps | 40Gbps | ≥40Gbps | ≥20Gbps | ≥20Gbps | 40Gbps |
Max Voltage | 20V | 20V | 48V | 20V | 20V | 50V |
Max Current | 5A*4 | 5A | 5A*4 | 5A | 5A | 5A |
USB2 HS Connection | Side-A & B: D± | Side-A: D± | Side-A: D± | Side-A: D± | Side-A: D± | Side-A: D± |
CC1/CC2 | CC1,CC2 connect through*3 | CC1 connects through, CC2 terminates to eMark for Vconn | CC1,CC2 connect through*3 | CC1 connects through, CC2 terminates to eMark for Vconn | CC1 connects through, CC2 terminates to eMark for Vconn | CC1 connects through, CC2 terminates to eMark for Vconn |
Uses | Flip testing for hosts supporting SuperSpeed up to 20Gbps, Flip testing of CC, USB2 & USB3 lines |
Standard USB-C connectivity. Compatible with Thunderbolt. | Flip testing for hosts supporting SuperSpeed up to 40Gbps, Flip testing of CC, USB2 & USB3 lines |
Standard USB-C connectivity (Screw-lock on both ends) |
Standard USB-C connectivity (Screw-lock on one end) |
Standard USB-C connectivity with USB PD EPR support. Compatible with Thunderbolt. |
Length | 45cm / 18" | 70cm / 27" | 70cm / 27" | 1m / 39" | 1m / 39" | 1m / 39" |
View Cable | View Cable | View Cable | View Cable | View Cable | View Cable |
- *1 - All cables are capable of 480Mbps over USB2.0 HS
- *2 - For all SuperSpeed signals pairs TX1±, TX2±, RX1±, RX2±
- *3 - No pull-up/down or termination, No eMark (SOP' or SOP'' controller)
- *4 - * Without eMark, many devices will not allow >3A. Acroname devices can be controlled to provide 5A.