Products
Compact, rugged ToF distance sensor, 6 operating modes and industrial communication protocol. The sensor offers 12.5-meter detection capabilities using Time-of-Flight technology. The robust IP65 enclosure ensures dust-proof and water-resistant capabilities - in a compact (99 grams) and cost-effective design.
$216
Extended limited warranty for USB-C-Switch covering manufacturing defects.
$100
1.5ft, 10Gbps USB A male to USB-C male cable, 10Gbps, 3A for use with the 4-Port, Acroname USB-C Switch and beyond.
$11
With the TeraRanger Evo Mini, you can measure distances, detect movements, monitor stock levels, and recognize simple gesture. Provides versatile performance and value for money. Optimized for indoor distance sensing, Evo Mini offers ranging capabilities from 3 cm up to 3.3 m. Switch easily from single-pixel to multi-pixel modes. Evo Mini also features a robust ABS enclosure for increased protection and is supported with Arduino & Raspberry Pi sample codes and free ROS nodes to get your projects up and running in no time.
$41
LEAN AND MINIATURIZED PRODUCTION TESTING: With its ultra-small footprint, the MTM-Load-1 is engineered for load-testing of battery chargers, amplifiers, USB power outputs, and motor driver circuits. Ideal for functional testing in production or validation test environments.
$725
HIGH POWER. HIGH CURRENT. The MTM Power Development Board allows high power and high current connections to quickly deploy MTM testers.
$250
The UTM-30LX-EW scanning laser rangefinder is a small, accurate, high-speed device for outdoor obstacle detection. This model uses Ethernet interface for communication and can obtain measurement data in a 270° field of view up to a distance of 30 meters with millimeter resolution. It uses multi-echo technology in order to obtain usable measurement data in adverse weather conditions.
$4670
The UTM-30LX scanning laser rangefinder is a low power, small, accurate, high-speed device for obstacle detection.
$4270
The Hokuyo UST-20LX LiDAR sensor is low-power, small, accurate, high-speed device for obstacle detection. Equipped with an Ethernet interface, it can obtain measurement data in a 270° field of view up to 20 meters.
$2070
ACCURATE ALTITUDES: The SF30/D laser measurement sensor provides real-time, accurate altitude (AGL) measurements for UAVs. The lightweight 36-gram design features a time-of-flight range of up to 200 meters (656 feet) with an update rate of up to 20K readings per second.
$399
The National Institute of Standards and Technology (NIST) advances measurement science, standards, and technology for industries throughout the world. NIST certification means that the Acroname product you purchase and use has been tested against NIST standards and meets the exacting requirements required for safety and quality. One (1) business day processing or longer may be required.
$150
The USB-C Coaxial Universal Orientation Cable (UOC) enables automated testing of flipping USB-C connections when used with the USB-C-Switch, USBHub3c, or other USB-C flippable devices by providing an orientation-agnostic connection.
$70
The UST-10LX is a compact and lightweight 2D LiDAR sensor that excels at high-speed and accurate measurement, detection, and localization on autonomous mobile robots and automated guided vehicles and carts.
$1670
PRECISE AND ACCURATE: The SF000/B 50m is an ultra-small and light laser rangefinder specifically designed for size and weight-constrained applications. Its Time-of-Flight system quickly produces precise and accurate distance and speed measurements.
$279
SEAMLESS INTEGRATION: The LightWare SF000 USB Connector allows for easy connectivity of the LightWare SF000/B 50 m to a computer.
$35
The SF000 Breakout Board connects the LightWare SF000/B (50m) to various platforms, including:
* Pixhawk Serial & I2C Connectivity
* Arduino Serial & I2C Connectivity
* Raspberry Pi Serial & I2C Connectivity
* Pixhawk Serial & I2C Connectivity
* Arduino Serial & I2C Connectivity
* Raspberry Pi Serial & I2C Connectivity
$40
SENSE AND AVOID: The world’s smallest and lightest scanning LiDAR sensor. The LightWare SF45 gives "eyes" to high-cost unmanned autonomous vehicles (UAVs) and machines, lowering the risk of catastrophe and the safe delivery of payloads.
$449
The dS2832 is an Ethernet connected relay module featuring 32 channels of 16Amp 250Vac relays. Each relay has both normally open (NO) and normally closed (NC) as well as the common available on three terminals. 8 flexible I/O channels with a choice of VFC, NPN, or 12-bit analog input.
$204
Everything needed to set up the connections required for the Android Auto connectivity validation and certification test. Combined with software from Google, this package has all the hardware needed to get started with Android Auto testing: the Redriver model USB-C-Switch, four (4) 3.28ft USB-C to C e-marked cables, and one 1.5ft USB-C to A cable.
$765
USBHub3c gives developers and engineers full control to validate, control, and test the limits of devices built on the Power Delivery and USB-C specification.
$1200
Case for Devantech dS378 Ethernet relay board. Includes mounting holes for fixing to a wall or back panel. This precision snap together case includes screws for mounting the dS378 module.
Supplied as a case only, the dS378 module should be ordered separately.
Supplied as a case only, the dS378 module should be ordered separately.
$31
Devantech dS3484 case. Includes mounting holes for fixing to a wall or back panel. This precision snap together case includes screws for mounting the dS3484 module.
Supplied as a case only, the dS3484 module should be ordered separately.
Supplied as a case only, the dS3484 module should be ordered separately.
$29
The dS378 is an Ethernet connected relay module featuring 8 channels of 16Amp 250Vac relays. Each relay has both normally open (NO) and normally closed (NC) as well as the common available on three terminals. Create Peer to Peer control in just a few clicks with a powerful dScript programming language.
$93
Case for Devantech d2832 Ethernet relay board. Includes mounting holes for fixing to a wall or back panel. This precision snap together case includes screws for mounting the dS2832 module.
Supplied as a case only, the dS2832 module should be ordered separately.
Supplied as a case only, the dS2832 module should be ordered separately.
$52