Steel, right-angle, DIN rail mounting bracket with M3.5 screws for mounting Acroname's S77-USBHUB-2X4, S79-USBHUB-3P, S85-RDVR-USBCSW and S85-PASS-USBCSW products
Sturdy steel DIN rail mounting brackets are useful for mounting Acroname's Programmable USB products onto standard 35 mm DIN rail. Their unique feature is the threaded mounting tabs oriented perpendicular to the DIN rail, allowing perpendicular mounting of devices and saving valuable space on the DIN rail.
These brackets easily attach and detach from a DIN rail while maintaining high rigidty. The bracket latches onto both the top and bottom lips of the rail with the fixed (non spring-loaded) end of the bracket on the top of the rail to bear the weight of its device.
We strongly recommend using this DIN rail mount for use with Acroname's Programmable USB products. The included M3.5x8mm (on C55-DINRA-1) or M4x10mm (on C57-DINRA-1) screws are designed to interface properly with these products. Other mounting hardware may cause damage.
- Nickel-plated steel construction
- Four M4 threaded holes
- Clips onto 35mm DIN rail
People Also Viewed
DIN rail mount with M3.5 screws, compatible with Acroname products S77-USBHUB-2X4, S79-USBHUB-3P and S85-USBC-SWITCH
USBHub3c gives developers and engineers full control to validate, control, and test the limits of devices built on the Power Delivery and USB-C specification.
USBHub3+ is a 9-port USB 5Gbps hub with 2 host connections with a rugged steel housing, ESD protected design and nearly unlimited power output.
Automate port switching, hot-plug & type-C connector flips. Monitor Vbus & Vconn voltage & current.
Add New Review