USB-C 40 Gbps Coaxial Universal Orientation Cable 0.7 Meter EPR 240W

Price

$70.00

MSRP

$95.00

You Save Percentage

26%

The USB-C Coaxial Universal Orientation Cable (UOC) enables automated testing of flipping USB-C connections. When used with the USB-C-Switch or USBHub3c, this cable provides an orientation-agnostic connection. It is built with low-loss coaxial wires for the USB SuperSpeed data lines to ensure the highest possible signal integrity in your USB-C test system. C67-USBC-UOC is a specialized USB-C UOC cable used for flip testing of USB-C end devices (cameras, flash drives, development boards) which short the USB 480Mbps A and B side D+/D- lines at the USB-C connector. Products which implement fully separated D+/D- connections for each side of the USB-C connector should use the C70-USB-UOC.

SKU:

C67-USBC-UOC

Manufactured by

Acroname

China

Tabs

Overview

USB-C® Coaxial Universal Orientation Cable (UOC) is a customized USB-C male to USB-C male cable for use with Acroname's programmable USB-C-Switch or USBHub3c. The coaxial UOC cable provides an orientation-agnostic USB-C connection, required for USB-C-Switch or USBHub3c software-based cable flip functionality, in addition to a coaxial connection for 20Gbps on 2 SuperSpeed data lanes for up to 40Gbps connections.

C67-USBC-UOC is a specialized USB-C UOC cable which carries one 480Mbps D+/D- data pair, so it should be used for flip testing of USB-C end devices (cameras, flash drives, development boards) which short the A and B side D+/D- lines to the USB-C connector.
Products which implement fully separated D+/D- connections for each side of the USB-C connector should use the C70-USBC-UOC.

The coaxial UOC cable should only be used in test environments and is not a substitute for a standard USB-C cable.

***This cable also functions as a replacement of the discontinued C46 cable.

Features

27.5" length (0.7M)
USB-C male to USB-C male
Supports 20Gbps link speeds
Supports USB PD modes up to 48V / 5A
USB-C Orientation Agnostic
For use only with USB-C Switch or USB-C Hub

Downloads

Files

Attachment	Size
C67 USB UOC Datasheet V1.0	445.51 KB

Specs

Reviews

Add new comment

FIND THE RIGHT USB-C CABLE FOR YOUR NEEDS Demo:

Compare Models

Select Columns to Filter

Reset Filter

Models

Speed (SS)
Rating
Max Voltage
Max Current
USB2 HS Connection
CC1/CC2
Uses
Length

C45-USBC-COAX
- ≥40Gbps
- 5/5
- 20V
- 5A
- Side-A: D±
- CC1 connects through, CC2 terminates to eMark for Vconn
- Standard USB-C connectivity. Compatible with Thunderbolt.
- 70cm / 27"
- View Cable
C59-USBC-C
- ≥40Gbps
- 5/5
- 50V
- 5A
- Side-A: D±
- CC1 connects through, CC2 terminates to eMark for Vconn
- Standard USB-C connectivity with USB PD EPR support. Compatible with Thunderbolt.
- 1m / 39"
- View Cable
C58-USBC-1SCREW-SINGLE
- ≥20Gbps
- 5/5
- 20V
- 5A
- Side-A: D±
- CC1 connects through, CC2 terminates to eMark for Vconn
- Standard USB-C connectivity (Screw-lock on one end)
- 1m / 39"
- View Cable
C69-USBC-1SCREW-DUAL
- ≥40Gbps
- 5/5
- 50V
- 5A
- Side-A: D±
- CC1 connects through, CC2 terminates to eMark for Vconn
- Standard USB-C connectivity with USB PD EPR support. Compatible with Thunderbolt. (Screw-lock on one end)
- 1m / 39"
- View Cable
C67-USBC-UOC
- ≥40Gbps
- 5/5
- 50V
- 5A^*4
- Side-A: D±
- CC1,CC2 connect through^*3
- Flip testing for hosts supporting SuperSpeed up to 40Gbps, Flip testing of CC, USB2 & USB3 lines
- 70cm / 27"
- View Cable
C70-USBC-UOC
- ≥40Gbps
- 5/5
- 50V
- 5A^*4
- Size-A & B+/-
- CC1,CC2 connect through^*3
- Flip testing for hosts supporting SuperSpeed up to 40Gbps, Flip testing of CC, USB2 & USB3 lines
- 70cm / 27"
- View Cable

*1 - All cables are capable of 480Mbps over USB2.0 HS
*2 - For all SuperSpeed signals pairs TX1±, TX2±, RX1±, RX2±
*3 - No pull-up/down or termination, No eMark (SOP' or SOP'' controller)
*4 - * Without eMark, many devices will not allow >3A. Acroname devices can be controlled to provide 5A.