The USB-C Coaxial Universal Orientation Cable (UOC) enables automated testing of flipping USB-C connections. When used with the USB-C-Switch or USBHub3c, this cable provides an orientation-agnostic connection. It is built with low-loss coaxial wires for the USB SuperSpeed data lines to ensure the highest possible signal integrity in your USB-C test system. C70-USBC-UOC is a specialized USB-C UOC cable used for flip testing of USB-C end devices (cameras, flash drives, development boards) which implement fully separate USB 480Mbps A and B side D+/D- lines at the USB-C connector. Products which short D+/D- connections for A and B side of the USB-C connector should use the C67-USBC-UOC.
USB-C® Coaxial Universal Orientation Cable (UOC) is a customized USB-C male to USB-C male cable for use with Acroname's programmable USB-C-Switch or USBHub3c. The coaxial UOC cable provides an orientation-agnostic USB-C connection, required for USB-C-Switch or USBHub3c software-based cable flip functionality, in addition to a coaxial connection for 20Gbps on 2 SuperSpeed data lanes for up to 40Gbps connections.
C70-USBC-UOC is a specialized USB-C UOC cable which carries two 480Mbps D+/D- data pair, so it should be used for flip testing of USB-C end devices which do not short the A and B side D+/D- lines to the USB-C connector.
Products which short D+/D- connections on A and B side of the USB-C connector should use the C67-USBC-UOC.
The coaxial UOC cable should only be used in test environments and is not a substitute for a standard USB-C cable.
***This cable also functions as a replacement of the discontinued C44 cable.
- 27.5" length (0.7M)
- USB-C male to USB-C male
- Supports 20Gbps link speeds
- Supports USB PD modes up to 48V / 5A
- USB-C Orientation Agnostic
- For use only with USB-C Switch or USB-C Hub
People Also Viewed
Automate port switching, hot-plug & type-C connector flips. Monitor Vbus & Vconn voltage & current.
USBHub3c gives developers and engineers full control to validate, control, and test the limits of devices built on the Power Delivery and USB-C specification.
1.5ft, 10Gbps USB A male to USB-C male cable, 10Gbps, 3A for use with the 4-Port, Acroname USB-C Switch and beyond.
1M USB-C® to USB-C® USB4® coax cable supporting 40 Gbps, Extended Power Range (EPR) 240W (48V 5A)
Add New Review