Products

The OPS242 is a complete short range radar sensor providing on board processing for motion detection, speed and direction reporting.

YDLIDAR G4 is a 360º laser range scanner (LIDAR). With both a USB Type-C and PH2.0-5P bus interface, this sensor runs off of 5V and uses a brushless motor drive to scan at a sampling frequency of 9000 readings per second up to 16m (52.4ft) distances. YDLIDAR also has a user-friendly software interface and point cloud map to quickly get up and running with.

The Benewake CE30-D is a solid-state LiDAR with a 60° by 9° FoV. This sensor has a range of 0.4m (1.3ft) to 30m (98.4ft) with a 1cm (0.4inch) resolution. The CE30-D has no mechanical rotating components internally, and an IP65 rating which provides very high reliability and stability. With a UDP interface this sensor runs off of 12VDC. 

The UST-10LX scanning laser rangefinder is a low power, small, accurate, high-speed device for obstacle detection. This model uses Ethernet interface for communication and can obtain measurement data in a 270° field of view up to a distance of 10 meters with millimeter resolution.

The UTM-30LX-EW scanning laser rangefinder is a small, accurate, high-speed device for outdoor obstacle detection. This model uses Ethernet interface for communication and can obtain measurement data in a 270° field of view up to a distance of 30 meters with millimeter resolution. It uses multi-echo technology in order to obtain usable measurement data in adverse weather conditions. 

The UTM-30LX scanning laser rangefinder is a low power, small, accurate, high-speed device for obstacle detection. This model uses USB 2.0 interface for communication and can obtain measurement data in a 270° field of view up to a distance of 30 meters with millimeter resolution. Due to the internal filtering and protective housing, this device can be used outdoors and is less susceptible to ambient light.

The UST-20LX scanning laser rangefinder is a low power, small, accurate, high-speed device for obstacle detection. This model uses Ethernet interface for communication and can obtain measurement data in a 270° field of view up to a distance of 20 meters with millimeter resolution.

The URG-04LX-UG01 scanning laser rangefinder is a low power, small, accurate, high-speed device for obstacle detection. Using the USB interface for power and communication, this unit can obtain measurement data in a 240° field of view up to a distance of 4 meters.

The URG-04LX scanning laser rangefinder is a low power, small, accurate, high-speed device for obstacle detection. This model includes both RS232 and USB interfaces for communication and can obtain measurement data 240° field of view up to a distance of 5.6 meters with millimeter resolution.

The UST-05LA scanning laser rangefinder is a low power, small, accurate, high-speed device for obstacle detection. This model includes both USB and RS422 interface for communication and setting area configurations with three output zones. It can obtain measurement data in a 270º field of view up to a distance of 5 meters with millimeter resolution.

The UST-05LN scanning laser rangefinder is a small, accurate, high-speed device for obstacle detection. With a USB interface, the device can be easily programmed to set three area detection output zones with real-time detection in a 270º field of view up to a distance of 5 meters with millimeter resolution.

TeraRanger Tower is a simultaneous multi-axis scanner. It is silent and has zero moving parts. It combines up to 8 TeraRanger One sensors and the TeraRanger Hub to create a scanner for SLAM (Simultaneous Localization and Mapping) and collision avoidance. Calibrated distance data is streamed from a USB or UART port as an array of synchronized distances, in millimetres. This model comes with 4 TeraRanger One sensors.