The LightWare SF000 USB Connector allows for easy connectivity of the LightWare SF000 to a computer. Configure the SF000, ensuring that the LiDAR is seamlessly integrated to any system.
The SF000/B is a 50m, ultra-small and light laser rangefinder designed for size and weight constrained applications. It uses a Time-Of-Flight system to make very fast, accurate distance and speed measurements.
The LightWare SF30/D is a high speed, light weight laser rangefinder. Weighing just 35g and with range of up to 200m and 20,000 readings per second, it is ideal for altimeter, mapping and obstacle detection in UAVs, drones and robotic vehicles.
The SF11/C is a long range (0-120m), light-weight, laser altimeter. The SF11/C includes digital (serial and I2C) and analog (12 bit) outputs along with a micro USB configuration port. Complete with power, interface and micro USB cables. It is directly compatible with Pixhawk flight controllers.
The LightWare SF30/B is a high speed, light weight laser rangefinder for mapping and obstacle detection by robotic vehicles such as UAVs with a range up to 50m.
Open frame version of the LW20, the SF20 is a small form factor, 50 meter range laser sensor suitable as original equipment in drones and other products where fast, accurate distance measurement is required.
The LW20/C is a small form factor, 100 meter range, laser distance sensor with fast, accurate measurements. The LW20/C includes driver hardware and software to control a servo driven LiDAR scanner for sense-and-avoid applications.
The TF03 is a low-cost, compact, long-range (up to 180m) industrial level LiDAR range sensor. With a blind spot of only 0.1m and accuracy of within 1%, this product is applicable to the terrain following of drones, the collision avoidance of cars, intelligent transportation and industrial safety warning.
The TFMini Plus is a single-point short-range ToF (Time of Flight) LiDAR sensor capable of measuring the distance to an object from 0.1m up to 12m. Unlike the original TFMini, the TFMini Plus has a full casing with an IP65 rating while still only weighing in at 11g.
The LightWare SF23/B is a very low power LiDAR that can be used in energy critical applications where batteries or solar cells are used. Weighing 10g, it can run from voltages as low as 3.2V and has an average current consumption of less than 2mA when taking one reading per second. The measuring range of the SF23/B is 0.2 to 50 meters, and features a serial interface.
The LightWare SF22/C is a LiDAR API development kit that can be used to test out new applications before investing in more expensive devices. The measuring range is from 0.2m to 100m and is Class 1M eye safe. It is a small form factor, general purpose laser sensor that measures the distance to objects by ToF (time of flight) of a laser flash 10 to 100 times a second. The SF22/C can interface using serial, I2C and USB, and is tolerant to changes in background lighting conditions, wind and noise.