Products

The TFMini Plus is a single-point short-range ToF (Time of Flight) LiDAR sensor capable of measuring the distance to an object from 0.1m up to 12m. Unlike the original TFMini, the TFMini Plus has a full casing with an IP65 rating while still only weighing in at 11g.

The TF03 is a cost-effective and compact long range (up to 180m) industrial level LiDAR sensor. With a blind spot of only 0.1m and accuracy of within 1%, this product is applicable to the terrain following of drones, the collision avoidance of cars, intelligent transportation and industrial safety warning.

Cross-platform USB to I2C interface adapter to connect any 100kHz I2C device or bus to a host PC.

Devantech self-powered USB to RS485 adapter with support for baud rates up to 250kbps, automatic bus turn-around, and buses up to 128 devices.

This connector converts a serial or UART signal from TTL to RS-232 levels. Included are indicator LEDs for host serial power and TTL logic power.

This kit combines the Acroname serial interface connector, extension cable, and a 1.82 m (6 ft) serial extension cable for interfacing your host to the BrainStem. This can also be used in other cases where you need to communicate with TTL devices from your computer.

This serial adapter bridges UART serial data to USB as a virtual serial port. The connector allows you to communicate with a device that requires serial data at common serial baud rates.

This kit combines the Acroname V3.0 USB Serial interface connector, extension cable and a 1.82 meter (6ft) USB 2.0 A-to-mini-B extension cable for interfacing a host computer to a UART serial device.

EtherStem 1.0 module is a general purpose embedded I/O module with TCP/IP interfacing support.

The 40-pin USBStem module is a general purpose embedded I/O module with a USB 2.0 interface.

A kit containing a 40-pin USBStem module, 40-pin mini breakout board board and a USB A to mini B cable; a $23 savings over buying everything separately. Order now and get started.

A kit containing a 40-pin EtherStem module, 40-pin mini breakout board and a USB A to mini B cable and an Ethernet cable; a $23 savings over buying everything separately. Easy to order and get started.

Adapter for communicating to I2C, SPI and serial buses from a USB port. Output pins may alternatively be configured as general purpose digital input/output and analog inputs.