USB-C Universal Orientation Cable (UOC) is a specialized USB-C cable for use only with Acroname's programmable USB-C-Switch. The C38-USBC-UOC cable provides an orientation-agnostic USB-C connection required for USB-C-Switch software-based cable flip functionality.
The USB-C Coaxial Universal Orientation Cable (UOC) enables automated testing of flipping USB-C connections when used with the USB-C-Switch, USBHub3c, or other type-C flippable device by providing an orientation-agnostic connection.
The USB-C Coaxial Universal Orientation Cable (UOC) enables automated testing of flipping USB-C connections. When used with the USB-C-Switch or USBHub3c, this cable provides an orientation-agnostic connection. It is built with low-loss coaxial wires for the USB SuperSpeed data lines to ensure the highest possible signal integrity in your USB-C test system. C46-USBC-UOC is a specialized USB-C UOC cable used for flip testing of USB-C end devices (cameras, flash drives, development boards) which short the USB 2.0 A and B side D+/D- lines at the USB-C connector. Products which implement fully separated D+/D- connections for each side of the USB-C connector should use the C44-USBC-UOC.
USB-C to USB-C USB 3.2 gen 2 (10Gbps) cable with coaxial SuperSpeed lines, support for 5A charging. Ideal for use with the 4-Port, Acroname USB Type-C Switch and beyond.
USB-C male to male cable with single locking thumbsrews on both sides for securing the connection. Cable is 1 meter (3 feet) long and support USB3.2 Gen2 10Gbps data speeds and 5A fast charging, including the eMarker.
Used to directly access VBUS from a USB-C port. USB-C to screw terminal breakout cable, 30cm long, exposing VBUS, ground, shield, USB HiSpeed (D+/D-) data lines.
1.5ft. USB 3.1 Type-C male to Type-C male cable, 10G, 5A for use with the 4-Port, Acroname USB Type-C Switch and beyond.