FAST INTEGRATION: The MTM-DEV-2 Breakout Board is the quickest way to effectively integrate MTM instrumentation in your production tester or bench system. It allows wire-wraps or ribbon cables to directly attach to MTM modules for quick deployment of in-wire-wrapped testers.
- Provides easy wiring or probe access MTM module resources.
- Customize test solutions using 3 MTM policy-free slots
- DC power input (typically 6-12VDC) from a 2.5mm DC jack or wire-screw blocks.
- Each module connector has an area for labels to identify specific modules and pinout assignments in your system.
The MTM platform is designed to reduce the complexity of manufacturing test systems. The S90-MTM-DEV-2 provides easy wiring or probe access to the resources of any MTM module. A convenient breakout board for MTM modules, MTM-DEV-2 is the fastest way to integrate MTM instrumentation in your production tester or bench test system.
With three (3) MTM policy-free slots, you can customize your test solution with just the MTM modules you need. The development board allows for a DC power input (typically 6-12VDC) to be supplied to all the installed modules from a 2.5mm DC jack or wire-screw blocks. The BrainStem I2C bus is connected to all the modules which allows a single embedded or host-based application to contol all the modules seamlessly.
Pins for each module slot are brought out to standard 0.1" spaced pads, which can be used to add your own headers or screw terminals in production environments. Each module connector has an area for labels to identify specific modules and pinout assignments in your system. The BrainStem I2C bus is also available for expansion.
The latest BrainStem development API is always available in the Download Center. The latest firwmare can be applied using the Updater utility. Check out the BrainStem Firmware Management reference entry or video for instructions on how to update your device.
- Connect up to three (3) MTM modules
- Bridge wire-wraps or ribbon cables to MTM
- Includes barrel and terminal block connectors for power
- XX" x YY" footprint integrates with standard fixture bases
People Also Viewed
CONTROL TEST ENVIRONMENTS through a wide-range of IO capabilities and enable communications between a host PC and any module on the BrainStem bus.
EXCELS AT POWER: The MTM-PM11 1: Channel DC Power Module excels at powering devices that need stable power under large transient loads during manufacturing and R&D testing. Optimized for devices using LiPo or similar batteries. Accurate voltage, temperature and current measurements can be made through the powerful and cross-platform BrainStem API.
SOLID STATE: The MTM-Relay is a key component to automated manufacturing test systems that require switching of industrial control voltages. Features four software-controlled solid-state relays (SSR) that can handle up to 60V and 6ADC/RMS.