SOLID STATE: The MTM-Relay is a key component to automated manufacturing test systems that require switching of industrial control voltages. Features four software-controlled solid-state relays (SSR) that can handle up to 60V and 6ADC/RMS.
- Cross-platform support (macOS, Linux and Windows)
- 4 high power (60V, 6A) solid-state relays (SSR) with load voltage measurement; 4 general-purpose digital inputs/outputs; and 2 UART serial ports; all inputs/outputs protected up to 12V input
- 1 BrainStem I2C FM+ (1 Mbit/s) bus
- 1 upstream USB connection on PCI connector; and 1 upstream mini-B type USB connector
- 6V to 12V DC input power
As part of Acroname's MTM series, the MTM-Relay module is a key component to automated manufacturing test systems requiring switching of industrial control voltages. The MTM-Relay module features four software-controlled solid-state relays (SSR). Each relay can handle up to 60V and 6ADC/RMS. The powerful BrainStem API allows simple networking of multiple modules into one system, and can report each channel's voltage.
The module also provides four digital (3.3V) GPIO to support module integration and provide additional capability, as necessary.
The latest BrainStem development API is always available in the Download Center. The latest firwmare can be applied using the Updater utility. Check out the BrainStem Firmware Management reference entry or video for instructions on how to update your device.
MANUFACTURING TEST MODULE SYSTEM (MTM)
Each module in Acroname's Manufacturing Test Module (MTM) series is ruggedized and designed to survive the rigors of CM or OEM manufacturing environments around the world. Pin interfaces are protected against reverse polarity and over voltage connections are designed to operate from 0°C to 70°C ambient, with no external cooling or fans. As a BrainStem, the MTM-Relay module can utilize any BrainStem link module to connect to a host PC or network. It can also operate independently by running embedded user-defined programs based on the BrainStem reflex language.
Every MTM module utilizes the BrainStem API for C++ host-based applications and the BrainStem reflex API which closely emulates the C++ API. Each module also features a self-discovery and notification system, allowing embedded and host based applications to determine the module's capabilities and programmatically control and direct communication between modules on the BrainStem network.
- Cross-platform support (Mac OS X, Linux and Windows)
- 4 high power (60V, 6A) solid-state relays (SSR) with load voltage measurement
- 4 general purpose digital inputs/outputs
- 2 UART serial ports
- 1 BrainStem I2C FM+ (1 Mbit/s) bus
- 1 upstream USB connection on PCI connector
- 1 upstream mini-B type USB connector
- Bridge from USB to I2C bus transactions
- 6V to 12V DC input power
- All inputs/outputs protected up to 12V input
- 0 to 70˚C ambient operating temperature
People Also Viewed
EXCELS AT POWER: The MTM-PM11 1: Channel DC Power Module excels at powering devices that need stable power under large transient loads during manufacturing and R&D testing. Optimized for devices using LiPo or similar batteries. Accurate voltage, temperature and current measurements can be made through the powerful and cross-platform BrainStem API.
REDUCE MTM WIRING COMPLEXITIES: The MTM Development Board Kit enables development and testing of embedded and high-level programs with common MTM modules.
CONTROL TEST ENVIRONMENTS through a wide-range of IO capabilities and enable communications between a host PC and any module on the BrainStem bus.
EXCELS AT POWER: The MTM-PM11 1: Channel DC Power Module excels at powering devices that need stable power under large transient loads during manufacturing and R&D testing. Optimized for devices using LiPo or similar batteries. Accurate voltage, temperature and current measurements can be made through the powerful and cross-platform BrainStem API.
Get up and running right out of the box with MTM on your functional test project. The MTM Starter Kit includes everything you need to start: one MTM Development Board, one MTM USBStem Module, one MTM 1 Channel Power Module, one AC/DC 12V/5A power supply and one USB A to mini-B cable.
SIMPLIFY INTERFACING: The MTM-Ether-Stem allows communication between host-based applications and any MTM module on the BrainStem bus. Designed for test direction, control, data collection, or loading reflex programs.
Get everything you need to evaluate MTM and develop your next functional test system with Acroname's MTM Evaluation Kit. The MTM Evaluation Kit includes: one MTM Development Board, one MTM USBStem Module, one MTM 1 Channel Power Module, one MTM IO Serial Module, one AC/DC 12V/5A power supply and one USB A to mini-B cable.