REDUCE MTM WIRING COMPLEXITIES: The MTM Development Board Kit enables development and testing of embedded and high-level programs with common MTM modules.
- Convenient 0.1" headers for all module IOs
- Wide range 6-12V DC input from multiple connection types
- Simple USB connectivity between modules with one upstream cable
- Standard USB type A sockets for downstream devices
- Support for all common MTM modules
- Policy-free development slot for custom designed hardware
The S73-MTM-DEV is a convenient breakout board for MTM modules. It has slots designed for one MTM-USBStem, MTM-EtherStem, MTM-IO-Serial, or MTM-PM-1 and one policy-free slot which can be used for custom modules or for your own test hardware. The development board allows for 6-12V DC power input to be supplied to all the modules from a 2.5mm DC jack, wire-screw blocks, or alligator clips. The BrainStem I2C bus is connected to all the modules which allows a single embedded or host-based application to contol all the modules seamlessly. Upstream USB signals for MTM-IO-Serial and MTM-USBStem modules are routed for convenient daisy-chaining from an on-board USB type Mini-B or either of the Mini-B connectors on the moduels. Downstream USB channels from the MTM-IO-Serial module are routed to standard USB type-A sockets.
All pins on all modules are brought out to standard 0.1" female headers or appropriate connectors for power and thermocouple connections.
The latest BrainStem development API is always available in the Download Center. The latest firwmare can be applied using the Updater utility. Check out the BrainStem Firmware Management reference entry or video for instructions on how to update your device.
- Convenient 0.1" headers for all module IOs
- Wide range 6-12V DC input from multiple connection types
- Simple USB connectivity between modules with one upstream cable
- Standard USB type A sockets for downstream devices
- Support for all common MTM modules
- Policy-free development slot for custom designed hardware
People Also Viewed
Get up and running right out of the box with MTM on your functional test project. The MTM Starter Kit includes everything you need to start: one MTM Development Board, one MTM USBStem Module, one MTM 1 Channel Power Module, one AC/DC 12V/5A power supply and one USB A to mini-B cable.
Acroname MTM-IO-Serial module features adjustable rail GPIO ports, high current drivers, software controlled USB 2.0 hub and serial UART ports, all controlled by BrainStem technology.
SOLID STATE: The MTM-Relay is a key component to automated manufacturing test systems that require switching of industrial control voltages. Features four software-controlled solid-state relays (SSR) that can handle up to 60V and 6ADC/RMS.
CONTROL TEST ENVIRONMENTS through a wide-range of IO capabilities and enable communications between a host PC and any module on the BrainStem bus.
EXCELS AT POWER: The MTM-PM11 1: Channel DC Power Module excels at powering devices that need stable power under large transient loads during manufacturing and R&D testing. Optimized for devices using LiPo or similar batteries. Accurate voltage, temperature and current measurements can be made through the powerful and cross-platform BrainStem API.
SIMPLIFY INTERFACING: The MTM-Ether-Stem allows communication between host-based applications and any MTM module on the BrainStem bus. Designed for test direction, control, data collection, or loading reflex programs.
Get everything you need to evaluate MTM and develop your next functional test system with Acroname's MTM Evaluation Kit. The MTM Evaluation Kit includes: one MTM Development Board, one MTM USBStem Module, one MTM 1 Channel Power Module, one MTM IO Serial Module, one AC/DC 12V/5A power supply and one USB A to mini-B cable.