Acroname Blog

How to Automate USB-C Monitor and Dock Testing with Industrial USB HubsDevices with integrated USB-C hubs — such as monitors, docks, and KVMs — must support a broad range of USB power and data modes. Validation and testing of these devices is challenging due to the number and variety of ports, the…

Introduction This case study presents how an automotive supplier was able to automate firmware and OS provisioning and End-of-Line (EOL) functional final assembly testing using Acroname industrial USB hubs and switches and their USB Host switching features.  This automation resulted in…

The problem with USB TESTING Suppose you’re a test engineer working on USB compliance testing.  You have a well-equipped lab with some high-end test equipment.  But you’d rather be in your office doing other work than in the lab plugging, unplugging, and flipping cables while…

The USBHub3c from Acroname is also capable of being used as a power delivery analyzer. The backbone of the PD analysis is Acroname’s HubTool. HubTool allows complete control over nearly all power features within the hub.An optional upgrade to the USBHub3C within the HubTool is PD logging. This…

Connectivity and Control of the Acroname USB-C-Switch Acroname’s BrainStem-enabled programmable USB-C-Switch can be very useful to help automate and monitor USB connections in test environments. USB-C-Switch handles USB connections differently than a USB hub and also introduces the MUX entity to…