Acroname Blog

Preparing devices for shipment is more than boxing them up. Batteries must be at the correct state of charge, and data needs to be wiped and the OS needs to be restored.  Acroname’s USBHub3c can be used to control device provisioning and deployment, and specifically enables automated wipe-and-…

Enhancing Production Efficiency with Batch ICP In device manufacturing, firmware is flashed onto devices using in-circuit programmers (ICPs).  automated batch programming can help remove the ICP bottleneck.  In this application note, we'll look at how to use USB port switching with…

USB-C functional tests involve a lot of cable plugging and unplugging, connector flipping, and device swapping.  Acroname's USB-C-Switch handles those connections for you, providing control through our HubTool GUI application or BrainStem API, even remotely!For this article, we'll look at…

The problem with USB TESTING Suppose you’re a test engineer working on USB compliance testing.  You have a well-equipped lab with some high-end test equipment.  But you’d rather be in your office doing other work than in the lab plugging, unplugging, and flipping cables while…