For use in automating restore and imaging of Apple-silicon devices. The USBHub3c in this kit is configured specifically to be able to pass DFU commands for automated restore and imaging applications.
USBHub3c can help you automate restore and imaging of your Apple devices. The USBHub3c in this kit is specially configured out-of-the-box to pass a Device Firmware Update (DFU) mode software command. Now you can put your Apple silicon in to DFU mode without manual screen or key manipulation. for restore using a device management / imaging platform of your choice.
Use this kit to restore or image up to 5 devices simultaneously. Additional kits can be used to scale your onboarding provisioning process by running the restores in parallel.
The 280W power supply allows you to charge your devices while they are being restored.
Compatible with DFU Blaster by Twocanoes Sofware
USB-C Port Characteristics
Specifications are valid at 25°C unless otherwise noted. Indoor application use only.
| Parameter | Conditions/Notes | Min | Typ. | Max | Units |
|---|---|---|---|---|---|
| Vbus Source Power6 | Pro Edition | - | - | 100 | W |
| Output Voltage, Vbus | Pro Edition | 3.1 | 5.25 | 21.0 | V |
| Vbus Measurement Full Scale Range | 0 | - | 32 | V | |
| Vbus Measurement Resolution | - | 488 | - | µV | |
| Vbus Measurement Accuracy | -0.05 | - | 0.05 | % | |
| Vbus Ripple Voltage | Peak to peak at target Vbus voltage | -15 | - | 15 | mV |
| Vbus Short-circuit Trip Current, Ilimit | TBD | - | TBD | A | |
| Vbus Short-circuit Trip Time, tlimit | - | TBD | - | µS | |
| Vbus Short-circuit Average Current, Ishort | After trip | TBD | TBD | TBD | A |
| Vbus Current Measurement Full Scale Range | -10 | - | 10 | A | |
| Vbus Current Measurement Resolution | - | 300 | - | µA | |
| Vbus Current Measurement Accuracy | -0.2 | - | 0.2 | % | |
| Vbus Current Measurement Range | -10 | - | 10 | A | |
| Vbus Current Limit Trip Point Range | Software programmable | -5000 | - | 5000 | mA |
| Vbus Current Limit Trip Point Resolution | - | TBD | - | mA | |
| Vbus Overcurrent Trip Time trip | Time from overcurrent at 90%-10% fall time across Vbus values | .05 | 1 | 1.5 | ms |
| USB SuperSpeed Data Rate | May depend on host or devices | - | - | 10 | Gbps |
| USB Hi-Speed Data Rate | May depend on host or devices | - | - | 480 | Mbps |
| Vbus Current Supply (SDP mode) | USB 2.0 data lines disabled or no USB host present, device limited | - | 100 | - | mA |
| Vbus Current Supply (SDP mode) | USB 2.0 data lines enabled and USB host present, device limited | - | 500 | - | mA |
| Vbus Current Supply (CDP mode) | USB 2.0 data lines enabled, USB host present, device limited | - | 1500 | - | mA |
| Vbus Current Supply (DCP mode) | USB 2.0 data lines enabled, no USB host present, device limited | - | 5000 | - | mA |
| Vconn Output Voltage, Vconn | USB 2.0 data lines enabled, no USB host present, device limited | 4.0 | 5.0 | 5.5 | V |
| Vconn Output Voltage Ripple | Peak to Peak | - | 132 | - | mA |
- 1x S99-USBHUB-3C: USB-C Hub with Power Delivery Analyzer + Tester
- 1x T99-PD-LOG: Software license to enable USB-PD logging necessary to enable DFU mode
- 6x C58-USBC-1SCREW-SINGLE: USB 3.1 C to C 5A Single Screw Locking Male to Male 1m
- 1x R467-ACDC-PS-1: 280W 24VDC Desktop AC/DC Power Adapter
- 1x W22-USBHUB-3C-1Y: 1 Year Extended Warranty for USBHub3c
People Also Viewed
Acroname's custom version of the highly regarded GST280A24-C6P is a reliable single-channel 24VDC, 280W power supply. The power supply is fitted with a 4 terminal 5.08mm pitch connector for direct connection to a USBHub3c. Recommended for powering USBHub3c in high power USB-C/PD power delivery applications.
DIN rail mount with M3.5 screws, compatible with Acroname products S77-USBHUB-2X4, S79-USBHUB-3P and S85-USBC-SWITCH
USB-C male to male cable with single locking thumbsrews on one-side for securing the connection. Cable is 1 meter (3 feet) long and is e-marked to support USB 20Gbps data speeds and 5A fast charging.
USB-C to USB-C USB4 (40Gbps) cable with coaxial SuperSpeed lines, support for 5A charging. Ideal for use with the Acroname USB-C-Switch and the USBHub3c.
Replaced by the C59 cable.
Software package which allows editing of the local Power Data Objects (PDOs).
Add New Review