Acroname Blog

More control than just on and off Enable and disable VBus, all Data, High Speed or Super Speed connections In addition to turning ports on and off, the USBHub3+ can also independently enable and disable Voltage and Data: Vbus All Data High Speed data (480 Mbps) Super Speed data (5 Gbps)…

The problem with USB TESTING Suppose you’re a test engineer working on USB compliance testing.  You have a well-equipped lab with some high-end test equipment.  But you’d rather be in your office doing other work than in the lab plugging, unplugging, and flipping cables while…

The USBHub3+ provides advanced control beyond basic on/off switches, allowing for precise USB customization. The USBHub3+ can also independently enable and disable Voltage and Data: Vbus All Data High Speed data (480 Mbps) Super Speed data (5 Gbps) We'll be working interactively using…

Connecting and Disconnecting USB Device PowerThe problem USB devices often need to be disconnected and reconnected (plug-cycled) or reset. The reasons for plug-cycling a USB device are as varied as types of USB devices themselves. In service, the simplest solution to many USB-related problems…

Connectivity and Control of the Acroname USB-C-Switch Acroname’s BrainStem-enabled programmable USB-C-Switch can be very useful to help automate and monitor USB connections in test environments. USB-C-Switch handles USB connections differently than a USB hub and also introduces the MUX entity to…

USB Hub vs USB Switch Several customers have asked us whether or not a USB hub or a USB switch is right. There are important and distinctive differences between these two classes of devices, both architecturally and functionally. In many cases, both devices can be used in the same system to…

Disabling USB Port for Acroname Hub   Many customers have found the Acroname USBHub2x4 useful in production environments, but in some cases, when the hub is powered up/booted it may be best if the downstream ports are NOT enabled. This is particularly useful for cases when there…