Products
The ETH008 Ethernet relay board provides 8 voltage-free contact relay outputs with a current rating of up to 16A each. This module is controlled over TCP/IP via Ethernet and is powered via 12VDC supply, either regulated or unregulated.
The dS3484 Ethernet controlled relay board provides 8 digital switching I/O channels and 4 voltage-free contact relay outputs with a current rating of up to 16A each. Controlled over TCP/IP via Ethernet or USB for development.
Extended, limited warranty for MTM-IO-Serial (S62-MTM-IO-SERIAL) covering manufacturing defects.
Extended, limited warranty for MTM-DAQ-2 (S92-MTM-DAQ-2) covering manufacturing defects.
The dS378 is an Ethernet connected relay module featuring 8 channels of 16Amp 250Vac relays. Each relay has both normally open (NO) and normally closed (NC) as well as the common available on three terminals. Create Peer to Peer control in just a few clicks with a powerful dScript programming language.
Extended, limited warranty for USBHub3+ (S79-USBHUB-3P) covering manufacturing defects.
A software add-on feature to enable control of the USBHub3c via RS232 serial interface on the external expansion header.
Software package which enables Qualcomm Quick Charge (QC2, QC3) support on ports 0-5.
Extended limited warranty for USB-C-Switch covering manufacturing defects.
The S79-USBHUB-3P NIST Calibration Certificate provides formal documentation that Acroname Inc. has used NIST-Traceble test equipment to verify that the Vbus voltage and current measurements are within the limits specificed in the Typical Performance Characteristics section of the product datasheet. One (1) business day processing or longer may be required.
ELEGANT CONNECTIONS: The S91-MTM-RCI-1 Ribbon Cable Interface connects non-MTM equipment into MTM-based systems. Bridge external test tools to an MTM test-point carrier board (TPCB) using wired ribbon cable, headers, or terminal blocks.
The National Institute of Standards and Technology (NIST) advances measurement science, standards, and technology for industries throughout the world. NIST certification means that the Acroname product you purchase and use has been tested against NIST standards and meets the exacting requirements required for safety and quality. One (1) business day processing or longer may be required.
The 40-pin USBStem module is a general purpose embedded I/O module with a USB 2.0 interface.
A kit containing a 40-pin EtherStem module, 40-pin mini breakout board and a USB A to mini B cable and an Ethernet cable; a $23 savings over buying everything separately. Easy to order and get started.
A kit containing a 40-pin USBStem module, 40-pin mini breakout board board and a USB A to mini B cable; a $23 savings over buying everything separately. Order now and get started.
The USBHub3c NIST Calibration Certificate provides formal documentation that Acroname Inc. has used NIST-Traceble test equipment to verify that the voltage and current measurements are within the limits specificed in the Typical Performance Characteristics section of the product datasheet. One (1) business day processing or longer may be required.
ControlRoom provides a real-time view of your system's connected USB devices once a licensed USBHub3+ is connected. ControlRoom helps identify and manage your USB peripherals, storage devices, and other USB-connected hardware. Combining ControlRoom with the USBHub3+ enables the ability to unplug-plug cycle USB devices without entering a room or reaching into physically challenging spaces to access cabling. Additional diagnostics include speed issues, connectivity issues, bad USB cables, and other performance metrics.
Extended, limited warranty for USBHub3c (S99-USBHUB-3C-PRO, S99-USBHUB-3C-LAB) covering manufacturing defects.
The dS2832 is an Ethernet connected relay module featuring 32 channels of 16Amp 250Vac relays. Each relay has both normally open (NO) and normally closed (NC) as well as the common available on three terminals. 8 flexible I/O channels with a choice of VFC, NPN, or 12-bit analog input.
FAST INTEGRATION: The MTM-DEV-2 Breakout Board is the quickest way to effectively integrate MTM instrumentation in your production tester or bench system. It allows wire-wraps or ribbon cables to directly attach to MTM modules for quick deployment of in-wire-wrapped testers.
Provides USBHub3c software and API access to override Vbus voltage set points and current limits. Used in testing a device's response to incorrect Vbus voltages after USB-PD negotiation.
SIMPLIFY INTERFACING: The MTM-Ether-Stem allows communication between host-based applications and any MTM module on the BrainStem bus. Designed for test direction, control, data collection, or loading reflex programs.
CONTROL TEST ENVIRONMENTS through a wide-range of IO capabilities and enable communications between a host PC and any module on the BrainStem bus.