Acroname Blog

Preparing devices for shipment is more than boxing them up. Batteries must be at the correct state of charge, and data needs to be wiped and the OS needs to be restored.  Acroname’s USBHub3c can be used to control device provisioning and deployment, and specifically enables automated wipe-and-…

How to Automate USB-C Monitor and Dock Testing with Industrial USB HubsDevices with integrated USB-C hubs — such as monitors, docks, and KVMs — must support a broad range of USB power and data modes. Validation and testing of these devices is challenging due to the number and variety of ports, the…

Enhancing Production Efficiency with Batch ICP In device manufacturing, firmware is flashed onto devices using in-circuit programmers (ICPs).  automated batch programming can help remove the ICP bottleneck.  In this application note, we'll look at how to use USB port switching with…

Sometimes we hear from customers who have used our programmable USB hubs for unusual applications. Maybe one of these examples will help solve your problem! Dual-Hosting USB Storage Volumes  Imagine a scenario where one host machine directly boots from an OS image on an SSD or thumb…

Warehouse Automation and SensorsHow can you automate your warehouses? Should you automate your manufacturing? This article is an extension of our Hokuyo and Yujin post, and goes into more depth about warehouse automation.Why Automate Warehouses?Let's address the elephant in the room. Are robots…

Solving Overcharging for Mobile DevicesA primary feature of Acroname hubs is the ability to turn a USB port on and off. Looking more closely, Acroname hubs also have the more granular ability to disable power/VBUS on a given port, independently from the USB D+/D- data lines on the same port.…

 Daisy Chain Acroname USB HubsCustomers often ask how many Acroname USBHub3+ hubs can be daisy-chained.The answer is pretty simple: four.However, getting there requires some understanding of the USB specification and the internal topology of Acroname hubs. Also, by following our suggested…

Connecting and Disconnecting USB Device PowerThe problem USB devices often need to be disconnected and reconnected (plug-cycled) or reset. The reasons for plug-cycling a USB device are as varied as types of USB devices themselves. In service, the simplest solution to many USB-related problems…

var imgs = document.getElementsByClassName('field--name-field-blog-image'); for (var i = 0; i…

At Acroname, we have built up no small amount of expertise in USB standards and functionality. In addition to our off-the-shelf software-controlled USB hubs and switches, we have also helped our clients create custom USB testing solutions. Below is just one example: an automated, rack-mounted…