- 1 of 2
- next ›
The OPS242 is a complete short range radar sensor providing on board processing for motion detection, speed and direction reporting.
The Benewake CE30-D is a solid-state LiDAR with a 60° by 9° FoV. This sensor has a range of 0.4m (1.3ft) to 30m (98.4ft) with a 1cm (0.4inch) resolution. The CE30-D has no mechanical rotating components internally, and an IP65 rating which provides very high reliability and stability. With a UDP interface this sensor runs off of 12VDC.
TeraRanger Evo 64px (with a USB interface) is a LED-based time-of-flight (TOF) distance sensor, with 64 individual distance readings in an 8 by 8 matrix. The Evo 64px has a 15° Field of View (FoV) with a range of 0.1m (4in) to 5m (16.4ft) and an update rate of up to 130 frames per second.
- TeraRanger Evo 64px
The TFMini Plus is a single-point short-range ToF (Time of Flight) LiDAR sensor capable of measuring the distance to an object from 0.1m up to 12m. Unlike the original TFMini, the TFMini Plus has a full casing with an IP65 rating while still only weighing in at 11g.
The TF03 is a cost-effective and compact long range (up to 180m) industrial level LiDAR sensor. With a blind spot of only 0.1m and accuracy of within 1%, this product is applicable to the terrain following of drones, the collision avoidance of cars, intelligent transportation and industrial safety warning.
TeraRanger Evo 60m (with USB interface) is an LED-based time-of-flight (TOF) distance sensor, touting calibrated distance readings in millimeters with a range up to 60m, all in a very small and lightweight package. Ideal for eye-safe applications, EVO's LED technology utilizes a Field of View (FoV) to measure distance within the FoV area.
The LW20/B is a small form factor, 50 meter range, laser distance sensor with fast, accurate measurements. The LW20/B includes driver hardware and software to control a servo driven LiDAR scanner for sense-and-avoid applications.
TeraRanger Evo 600Hz (with a USB interface) is a LED-based time-of-flight (TOF) distance sensor, touts 600 readings per second and calibrated distance readings in millimeters with a range up to 8m, all in a very small and lightweight package. Ideal for eye-safe applications, EVO's LED technology utilizes a Field of View (FoV) to measure distance within the FoV area.
Open frame version of the LW20, the SF20 is a small form factor, 50 meter range laser sensor suitable as original equipment in drones and other products where fast, accurate distance measurement is required.
The SF11/B is a medium range (0-50m), light-weight, laser altimeter. The SF11/B includes digital (serial and I2C) and analog (12 bit) outputs along with a micro USB configuration port. Complete with power, interface and micro USB cables. It is directly compatible with Pixhawk flight controllers.
Sharp long range infrared distance sensor makes continuous distance readings and outputs an analog voltage proportional to a target's range. Working range of 100 cm to 550 cm (~3 ft to 18 ft). 5-pin JST connector and all wiring included.
Sharp infrared distance sensor makes continuous distance readings and returns a logic value corresponding to object detection within a pre-set range of 24 cm (9.45 in).
LightWare 3D printed, ABS plastic mounting bracket for their LW20 sensor with 3 x M2 mounting holes.
Sharp infrared distance sensor makes continuous distance readings and outputs an analog voltage proportional to an objects range. Working range of 1.5″ to 12″ (4 cm to 30 cm). Kit includes wires and connector. This model is a direct replacement for the discontinued Sharp GP2D120.
The SRF04 is a single transducer ultrasonic rangefinder with a 2-pin Serial interface. The SRF04 returns a pulse proportional to distance that can measure from approx 3cm (1.2in) to 300cm (9.8ft).
The SRF05 is a single transducer ultrasonic rangefinder with either a single pin for both trigger and echo, or separate trigger and echo pins.The SRF05 can be a drop-in replacement for the SRF04. The SRF05 returns a pulse proportional to distance that can measure from approx 1cm (0.4in) to 400cm (13ft).
The SRF10 is a ultrasonic rangefinder with an I2C interface. The SRF10 can measure in cm or Inches from 3cm (1.2in) to 600cm (19ft).
The SRF02 is a single transducer ultrasonic rangefinder with both I2C and Serial interfaces. The SRF02 can measure in cm or Inches from approx 15cm (6in) to 600cm (19ft).
The SRF01 is a single transducer ultrasonic rangefinder in a very small footprint PCB with a single pin Serial interface. The SRF01 can measure in cm or Inches. In standard mode the SRF01 measures from approx 18cm (7in) to 600cm (19ft). In Advanced mode it is possible for the SRF01 to measure range all the way down to zero.
The LightWare SF30/B is a high speed, light weight laser rangefinder for mapping and obstacle detection by robotic vehicles such as UAVs with a range up to 50m.
TeraRanger One is a lightweight, high-performance distance measurement sensor based on infrared time-of-flight (ToF) technology. Type A is best for use in indoor environments.
- TeraRanger One
Precision-machined bracket mounts a LightWare SF10, SF11 or SF30 series laser rangefinder to your project. Made of high-grade aluminum, it conveniently positions and protects the rangefinder in both stationary and mobile applications. Assembly is quick and easy and all necessary mounting hardware is included.
Aluminum bracket kit to conveniently mount a LightWare SF11-C Laser Rangefinder to an ELEV-8 v3 Quadcopter. Easy to mount to holes already present in the ELEV-8 v3 chassis plate, precision machined aluminum helps protect the rangefinder and positions it facing downward for accurate distance and altitude measurements. Takes no space beneath the quadcopter's bottom chassis plate, leaving plenty of room for other accessories.