The UTM-30LX-EW scanning laser rangefinder is a small, accurate, high-speed device for outdoor obstacle detection. This model uses Ethernet interface for communication and can obtain measurement data in a 270° field of view up to a distance of 30 meters with millimeter resolution. It uses multi-echo technology in order to obtain usable measurement data in adverse weather conditions. 

The UTM-30LX scanning laser rangefinder is a low power, small, accurate, high-speed device for obstacle detection.

The UST-05LA scanning laser rangefinder is a low power, small, accurate, high-speed device for obstacle detection. This model includes both USB and RS422 interface for communication and setting area configurations with three output zones. It can obtain measurement data in a 270º field of view up to a distance of 5 meters with millimeter resolution.

The Hokuyo UST-20LX LiDAR sensor is low-power, small, accurate, high-speed device for obstacle detection. Equipped with an Ethernet interface, it can obtain measurement data in a 270° field of view up to 20 meters.

The UST-05LN scanning laser rangefinder is a small, accurate, high-speed device for obstacle detection. With a USB interface, the device can be easily programmed to set three area detection output zones with real-time detection in a 270º field of view up to a distance of 5 meters with millimeter resolution.

The UST-10LX is a compact and lightweight 2D LiDAR sensor that excels at high-speed and accurate measurement, detection, and localization on autonomous mobile robots and automated guided vehicles and carts. 

The URG-04LX-UG01 scanning laser rangefinder is a low power, small, accurate, high-speed device for obstacle detection. Using the USB interface for power and communication, this unit can obtain measurement data in a 240° field of view up to a distance of 4 meters.

SIMPLIFY INTERFACING: The MTM-Ether-Stem allows communication between host-based applications and any MTM module on the BrainStem bus. Designed for test direction, control, data collection, or loading reflex programs. 

FAST INTEGRATION: The MTM-DEV-2 Breakout Board is the quickest way to effectively integrate MTM instrumentation in your production tester or bench system. It allows wire-wraps or ribbon cables to directly attach to MTM modules for quick deployment of in-wire-wrapped testers. 

Case for Devantech d2832 Ethernet relay board. Includes mounting holes for fixing to a wall or back panel. This precision snap together case includes screws for mounting the dS2832 module.

Supplied as a case only, the dS2832 module should be ordered separately.

The Devantech SRF10 is an ultrasonic rangefinder with a I2C interface that combines a self-contained design with minimal power draw. Able to measure in both centimeters and inches, the ranging module can measure from 3cm to 600cm (1.2 inches to 19 feet).

The Devantech SRF04 sonar range finder is a single-transducer ranging module with a 2-pin serial interface. With a range from 3cm to 3m (or 1.2in to 9.8ft), it’s ideal for situations that require accurate ranging information.

The SRF02 is a single transducer ultrasonic rangefinder in a small footprint PCB. This Devantech ultrasonic sonar ranging module has I2C and Serial interfaces with a range of 16 cm to 6 m (about 6 inches to 19 feet)

The SRF05 is a single transducer ultrasonic rangefinder with either a single pin for both trigger and echo, or separate trigger and echo pins.The SRF05 can be a drop-in replacement for the SRF04. The SRF05 returns a pulse proportional to distance that can measure from approx 1cm (0.4in) to 400cm (13ft).