The USB-C-Switch Pro is a managed USB-C 1:4 / 4:1 port selector and multiplexer switch designed for automated device testing, validation, and A/V applications.
Overview
The USB-C-Switch Pro is a managed USB4 1:4 / 4:1 port selector and multiplexer switch supporting 240 W USB Power Delivery Extended Power Range (USB PD EPR) and 8K@120 Hz DisplayPort Alt mode video pass through.
The USB-C-Switch Pro is not a hub — it directly connects and redrives signals from the common port to one of four mux channels or from one mux port to the common port, appearing “like a cable” to the connected devices. Data link, power negotiations, and power between USB devices are managed by the attached devices themselves.
Extensive port monitoring and control features include:
- Current and voltage measurement on VBUS and VCONN lines of all ports
- Independent control of USB data and power connections per port
- Software-controllable cable flip
- Supports USB Power Delivery Extended Power Range (EPR) up to 240 W including PPS and AVS
- USB4 (40 Gbps), USB 3.2 Gen2 (10 Gbps) and USB 2 switching
- DisplayPort 2.1 Alt Mode routing (1-4 lanes, UHBR20, up to 2 x 8k@120Hz)
- USB-PD, SBU, and DisplayPort Aux message logging, decoding, and injection
- Enable/Disable any port for automation Type-C hot-plug / unplug actions
- Automate type-C connector flip actions (using Acroname UOC cable)
- Monitor voltage, current on all ports
- Full control via USB Control port, Ethernet, I2C, RS-232, or port selection via GPIO
- Screw retention on all USB-C, DC power, and external IO ports
- 1 - USB-C-Switch Pro 4-port USB4 40Gbps 240 W EPR Switch
- 1 - USB-C male-to-male full featured e-marked cable 40Gbps, single screw single side, 1M C69-USBC-C
- 2 - USB-C male-to-male full featured e-marked cable 80Gbps, 0.3M
- 2 - Acroname Universal Orientation Cables (UOC), 0.7M 1x C67-USB-UOC 1x C70-USB-UOC
- 1 - 8 Position Terminal Block Plug
Add New Review