Products

The LightWare SF000 USB Connector allows for easy connectivity of the LightWare SF000 to a computer.  Configure the SF000, ensuring that the LiDAR is seamlessly integrated to any system.  

The SF000/B is a 50m, ultra-small and light laser rangefinder designed for size and weight constrained applications.  It uses a Time-Of-Flight system to make very fast, accurate distance and speed measurements.

The UST-10LX scanning laser rangefinder is a low power, small, accurate, high-speed device for obstacle detection. This model uses Ethernet interface for communication and can obtain measurement data in a 270° field of view up to a distance of 10 meters with millimeter resolution.

The LightWare SF30/D is a high speed, light weight laser rangefinder. Weighing just 35g and with range of up to 200m and 20,000 readings per second, it is ideal for altimeter, mapping and obstacle detection in UAVs, drones and robotic vehicles.

The UST-20LX scanning laser rangefinder is a low power, small, accurate, high-speed device for obstacle detection. This model uses Ethernet interface for communication and can obtain measurement data in a 270° field of view up to a distance of 20 meters with millimeter resolution.

The UTM-30LX scanning laser rangefinder is a low power, small, accurate, high-speed device for obstacle detection. This model uses USB 2.0 interface for communication and can obtain measurement data in a 270° field of view up to a distance of 30 meters with millimeter resolution. Due to the internal filtering and protective housing, this device can be used outdoors and is less susceptible to ambient light.

The UTM-30LX-EW scanning laser rangefinder is a small, accurate, high-speed device for outdoor obstacle detection. This model uses Ethernet interface for communication and can obtain measurement data in a 270° field of view up to a distance of 30 meters with millimeter resolution. It uses multi-echo technology in order to obtain usable measurement data in adverse weather conditions. 

The SF11/C is a long range (0-120m), light-weight, laser altimeter. The SF11/C includes digital (serial and I2C) and analog (12 bit) outputs along with a micro USB configuration port. Complete with power, interface and micro USB cables. It is directly compatible with Pixhawk flight controllers.

The LightWare SF30/B is a high speed, light weight laser rangefinder for mapping and obstacle detection by robotic vehicles such as UAVs with a range up to 50m. 

 

Open frame version of the LW20, the SF20 is a small form factor, 50 meter range laser sensor suitable as original equipment in drones and other products where fast, accurate distance measurement is required.

The LW20/C is a small form factor, 100 meter range, laser distance sensor with fast, accurate measurements. The LW20/C includes driver hardware and software to control a servo driven LiDAR scanner for sense-and-avoid applications.

The UST-05LX scanning laser rangefinder is a low power, small, accurate, high-speed device for obstacle detection. This model uses Ethernet interface for communication and can obtain measurement data in a 270° field of view up to a distance of 5 meters with millimeter resolution.

The TF03 is a low-cost, compact, long-range (up to 180m) industrial level LiDAR range sensor. With a blind spot of only 0.1m and accuracy of within 1%, this product is applicable to the terrain following of drones, the collision avoidance of cars, intelligent transportation and industrial safety warning.

The TFMini Plus is a single-point short-range ToF (Time of Flight) LiDAR sensor capable of measuring the distance to an object from 0.1m up to 12m. Unlike the original TFMini, the TFMini Plus has a full casing with an IP65 rating while still only weighing in at 11g.

The Benewake CE30-D is a solid-state LiDAR with a 60° by 9° FoV. This sensor has a range of 0.4m (1.3ft) to 30m (98.4ft) with a 1cm (0.4inch) resolution. The CE30-D has no mechanical rotating components internally, and an IP65 rating which provides very high reliability and stability. With a UDP interface this sensor runs off of 12VDC. 

The LightWare SF23/B is a very low power LiDAR that can be used in energy critical applications where batteries or solar cells are used. Weighing 10g, it can run from voltages as low as 3.2V and has an average current consumption of less than 2mA when taking one reading per second. The measuring range of the SF23/B is 0.2 to 50 meters, and features a serial interface.

The LightWare SF22/C is a LiDAR API development kit that can be used to test out new applications before investing in more expensive devices. The measuring range is from 0.2m to 100m and is Class 1M eye safe. It is a small form factor, general purpose laser sensor that measures the distance to objects by ToF (time of flight) of a laser flash 10 to 100 times a second. The SF22/C can interface using serial, I2C and USB, and is tolerant to changes in background lighting conditions, wind and noise.

YDLIDAR G4 is a 360º laser range scanner (LIDAR). With both a USB Type-C and PH2.0-5P bus interface, this sensor runs off of 5V and uses a brushless motor drive to scan at a sampling frequency of 9000 readings per second up to 16m (52.4ft) distances. YDLIDAR also has a user-friendly software interface and point cloud map to quickly get up and running with.

The UST-05LN scanning laser rangefinder is a small, accurate, high-speed device for obstacle detection. With a USB interface, the device can be easily programmed to set three area detection output zones with real-time detection in a 270º field of view up to a distance of 5 meters with millimeter resolution.

The UST-05LA scanning laser rangefinder is a low power, small, accurate, high-speed device for obstacle detection. This model includes both USB and RS422 interface for communication and setting area configurations with three output zones. It can obtain measurement data in a 270º field of view up to a distance of 5 meters with millimeter resolution.

The URG-04LX-UG01 scanning laser rangefinder is a low power, small, accurate, high-speed device for obstacle detection. Using the USB interface for power and communication, this unit can obtain measurement data in a 240° field of view up to a distance of 4 meters.

The URG-04LX scanning laser rangefinder is a low power, small, accurate, high-speed device for obstacle detection. This model includes both RS232 and USB interfaces for communication and can obtain measurement data 240° field of view up to a distance of 5.6 meters with millimeter resolution.