DIN rail mount with M3.5 screws, compatible with Acroname products S77-USBHUB-2X4, S79-USBHUB-3P and S85-USBC-SWITCH
This kit includes a plastic, spring-actuated DIN rail mount (DIN35 (DIN 50045, 50022 and 50035) and EN 60715) and two associated screws (M3.5x8mm -or- M4x10mm) and washers. The mount is compatible with standard "top hat" rails with 35mm width. This mount kit readily attaches to most Acroname DIN-rail mountable products, including the USBHub2x4 , USBHub3+, USB-C-Switch, and the USBHub3c.
We strongly recommend using this DIN rail mount kit to mount Acroname's Programmable USB products. The included screws, M3.5x8mm (on C31-DINM-1) or M4x10mm (on C56-DINM-1) are safe to use, even for bottom mounting. Other mounting hardware may cause damage.
Please make sure that you choose the correct kit for your product:
DIN Rail Mount Kit M3.5 for:
USBHub3+
USB-C-Switch
USBHub2x4
DIN Rail Mount Kit M4 for:
USBHub3c
People Also Viewed
Steel, right-angle, DIN rail mounting bracket with M3.5 screws for mounting Acroname's S77-USBHUB-2X4, S79-USBHUB-3P, S85-RDVR-USBCSW and S85-PASS-USBCSW products
The USBHub2x4 is a 4-port software-programmable 480Mbps (USB 2.0) hub that is designed for demanding industrial environments where advanced control and monitoring of USB ports is required. This is very useful in testing or development environments where standard “always-on” behavior of a consumer-grade USB hub is not desirable.
USBHub3+ is a 9-port USB 5Gbps hub with 2 host connections with a rugged steel housing, ESD protected design and nearly unlimited power output.
Automate port switching, hot-plug & type-C connector flips. Monitor Vbus & Vconn voltage & current.
USBHub3c gives developers and engineers full control to validate, control, and test the limits of devices built on the Power Delivery and USB-C specification.
Add New Review