Acroname Blog

What stays the same, what's new, and when you need to change your scripts.The short answerUSB-C-Switch Pro (S110) extends USB-C-Switch (S85) to 240 W and 40 Gbps, and adds USB Power Delivery monitoring and injection, along with Ethernet, serial, and GPIO control.Existing USB-C-Switch users can swap…

Cut Test Time, Eliminate Errors, and Scale Across Lines — No Cable Flipping RequiredIf you manage production lines for devices with USB-C ports, the real challenge isn’t the port — it’s the testing.A single bad port means a return, a delay, or a hit to your metrics. And catching it after the fact?…

Introduction This case study presents how an automotive supplier was able to automate firmware and OS provisioning and End-of-Line (EOL) functional final assembly testing using Acroname industrial USB hubs and switches and their USB Host switching features.  This automation resulted in…

Power Measurement and Voltage Monitoring with USBHUB3+ Among other properties, using the USBHub3+ we can view: Per-port Voltage Per-port Current Input Voltage Input Current Measuring voltage and current with HubTool If you haven't already, install HubTool, which…

ESD Mitigations with AcronameThe next-generation circuitry in today’s consumer and industrial electronics is smaller, faster, better. Consumers love the innovations. But test engineers are not as enthusiastic. Because that innovation comes with a striking downside: increased susceptibility to…

The need for USB-C and power delivery ports in automobiles is speeding up, and the auto industry is adapting to the new demands. As the engineer in charge of testing, you’ll need to up your automated validation testing game. We live in an on-the-go world, and our devices travel with us in our…

Kentigen, one of Acroname's partners supporting the test market in Europe, used MTM to solve a months-old problem of testing final assemblies for an automative infotainment system. Spoiler: Kentigen used MTM's modularized, miniaturized, and low-cost instrumentation as the heart of its system…

Replication of testing environments is a known challenge in the Functional Circuit Test world. Wiring an FCT fixture using wire wrap can take hours, and the validation of a tester itself, to ensure simple continuity and function, can take days. Anyone setting up a fixture-based test bench or rack-…

Trusted, calibrated equipment is a big deal for our customers. MTM customers are already aware of the DAQ-2 module’s extensive, accurate, precise calibration, as well as our ability to provide certificates of NIST traceable calibration, available at either the time of purchase or as a renewal…

When it comes to advanced and cost sensitive electronic products, it remains vital to accurately test these devices during manufacturing and assembly to make sure they provide what the consumer expects and that each and every feature works how it should, right out of the box. The last thing a…