Acroname Blog

Expand Hub Functionality with BrainStem APIAcroname's hubs are a robust hardware solution to many common usb related tasks:  remotely simulating a manual plug-cycle, charging (or not charging) batteries on connected devices, and switching control between two host computers.…

Connecting and Disconnecting USB Device PowerThe problem USB devices often need to be disconnected and reconnected (plug-cycled) or reset. The reasons for plug-cycling a USB device are as varied as types of USB devices themselves. In service, the simplest solution to many USB-related problems…

USB Switching in Small Conference Rooms   The Problem with Switching Peripherals to BYOD In modern conference rooms, especially those equipped for teleconferencing, USB-based peripherals are commonplace: conference camera, microphones, document camera, keyboard and mouse, just to name a few…

Eliminate Battery Swelling with Acroname USB Hubs and Switches For device compatibility and mobile application development labs (commonly called “device farms” or “CI or continuous improvement labs”), battery swelling in mobile devices is a common, costly, and potentially dangerous problem. Not…

 Acroname USB C Switch Data Line MismatchAbstract: For users of the redriver version of the Acroname USB Type C 4-Channel Port Selector Switch: if using USB 2.0 only or are having troubles with USB 2.0 connections, disable the USB 3.1 redriver and disconnect the USB 3.1 data lines to restore…

Kentigen, one of Acroname's partners supporting the test market in Europe, used MTM to solve a months-old problem of testing final assemblies for an automative infotainment system. Spoiler: Kentigen used MTM's modularized, miniaturized, and low-cost instrumentation as the heart of its system…

var imgs = document.getElementsByClassName('field--name-field-blog-image'); for (var i = 0; i…

At Acroname, we have built up no small amount of expertise in USB standards and functionality. In addition to our off-the-shelf software-controlled USB hubs and switches, we have also helped our clients create custom USB testing solutions. Below is just one example: an automated, rack-mounted…

Replication of testing environments is a known challenge in the Functional Circuit Test world. Wiring an FCT fixture using wire wrap can take hours, and the validation of a tester itself, to ensure simple continuity and function, can take days. Anyone setting up a fixture-based test bench or rack-…

Trusted, calibrated equipment is a big deal for our customers. MTM customers are already aware of the DAQ-2 module’s extensive, accurate, precise calibration, as well as our ability to provide certificates of NIST traceable calibration, available at either the time of purchase or as a renewal…