Acroname Blog

Connectivity and Control of the Acroname USB-C-Switch Acroname’s BrainStem-enabled programmable USB-C-Switch can be very useful to help automate and monitor USB connections in test environments. USB-C-Switch handles USB connections differently than a USB hub and also introduces the MUX entity to…

USB Hub vs USB Switch Several customers have asked us whether or not a USB hub or a USB switch is right. There are important and distinctive differences between these two classes of devices, both architecturally and functionally. In many cases, both devices can be used in the same system to…

Test engineers face many challenges today. Implementing a functional test plan involves integration of several different measurement and interface tools, software packages and licenses. Acroname's MTM instrumentation takes the frustration out of this process as one of the simplest and…

Create and Deploy Wireless Test FixturesOne of the benefits of using Acroname's BrainStem/MTM series modules in functional circuit test is being able to create and deploy "wireless" test fixtures - a fixture with no wire-wraps or cables. The small form-factor and low power of MTM modules can be…

The editors at Electronic Design had never seen a programmable USB hub before, so we sent one of the Acroname USBHub3+ units to them for evaluation. The team at ED mentioned how simple USBHub3+ is to use and particularly how it would enhance USB product testing or manufacturing…

 Acroname Testimonial for the Best USB 3 HubCome take a look at what customers are saying about Acroname's USBHub3+. We are excited to share this 5-star review of USBHub3+ on Amazon, written by an Acroname customer who was looking for a high-reliability USB 3.0 hub for their medical…

September 07, 2016 08:00 AM Eastern Daylight Time BOULDER, Colo.--(BUSINESS WIRE)--Acroname, a leading producer of embedded automation and manufacturing test platforms, has announced the launch of the USBHub3+, an 8-port programmable USB 3.0 hub which is optimized for manufacturing and…

Hokuyo Factory Reset ProcedureA few customers have mentioned that, when trying to reset the Hokuyo UST-10LX or UST-20LX sensors to the factory default IP address, the reset procedure found in the product specification may not reset the IP address properly.Per the UST-20LX Product Specification 2014…

Disabling USB Port for Acroname Hub   Many customers have found the Acroname USBHub2x4 useful in production environments, but in some cases, when the hub is powered up/booted it may be best if the downstream ports are NOT enabled. This is particularly useful for cases when there…

In this week's video, we show an example of testing LEDs in a board-level functional test system. We used a simple circuit board we created for testing a new light pipe design as an example. The video shows just how easily MTM can be used as an engineering tool and manufacturing test…