- 1 of 7
- next ›
Programmable, software-controlled, bidirectional 4-port USB-C switch supporting USB 3.1 Gen 2 data rates up to 10Gbps. Automate switching, hot-plug and type-C connector flips. Monitor Vbus and Vconn voltage and current. Support for USB, PD and alt-modes.
Rugged steel housing and ESD protected.
Includes one 1.5ft USB-C male-to-male full-featured, e-marked cable and one 1.5ft USB-C to A male-to-male.
Programmable, software-controlled, industrial USB 3.0 hub with 8 fast-charging (4A) ports, 2 host connections, and a dedicated port for control and monitoring. Control USB Hi-Speed, SuperSpeed data and power lines. Set current limit trip points for each port and monitor voltage and current on each port. Boost USB2 signal levels to account for difficult interconnection environments. Rugged steel housing and ESD protected to ±15kV (IEC61000-4-2 Level 4).
Programmable software controlled USB hub with 2 host connections and 4 fast-charging (2.5A) device connections. Switch and control data, power and current limits separately. Boost USB signal levels to account for difficult interconnection environments. Rugged steel housing and ESD protected to 30kV.
The LightWare LW20 is a very small form factor, 100m range laser sensor in an IP67 enclosure suitable for small drones and self-driving vehicles.
OmniPreSense OPS241-A is complete short-range radar (SRR) solution providing motion detection, speed and direction reporting. All radar signal processing is done on board and a simple API reports the processed data.
Open frame version of the LW20, the SF20 is a small form factor, 100 meter range laser sensor suitable as original equipment in drones and other products where fast, accurate distance measurement is required.
- LightWare SF20 (100m)
Scanse Sweep scanning LiDAR sensor with 40m range, 1000 samples/second sample rate, 360 degree field of view and 1-10Hz adjustable rotation frequency. Designed to bring powerful 360 degree sensing capabilities to everyone at an affordable price.
- Scanse Sweep V1 Scanning LIDAR
Get everything you need to evaluate MTM and develop your next functional test system with Acroname's MTM Evaluation Kit. The MTM Evaluation Kit includes: one MTM Development Board, one MTM USBStem Module, one MTM 1 Channel Power Module, one MTM IO Serial Module, one AC/DC 12V/5A power supply and one USB A to mini-B cable.
- MTM Evaluation Kit
Get up and running right out of the box with MTM on your functional test project. The MTM Starter Kit includes everything you need to start: one MTM Development Board, one MTM USBStem Module, one MTM 1 Channel Power Module, one AC/DC 12V/5A power supply and one USB A to mini-B cable.
- MTM Starter Kit
The LightWare SF11/C is a long range (0-120m), light weight laser altimeter designed for above-ground-level measurement from UAVs (multi-copter or fixed wing). It is directly compatible with Pixhawk flight controllers.
- LightWare SF11/C (120 meter)
Acroname MTM-IO-Serial module features adjustable rail GPIO ports, high current drivers, software controlled USB 2.0 hub and serial UART ports, all controlled by BrainStem technology.