The USB-C Coaxial Universal Orientation Cable (UOC) enables automated testing of flipping USB-C connections when used with the USB-C-Switch by providing an orientation-agnostic connection. It is built with low-loss coaxial wires for the USB SuperSpeed data lines to ensure the highest possible signal integrity in your USB-C test system. C44-USB-UOC is a specialized USB-C cable for use only with Acroname's programmable USB-C-Switch.
1.5ft. USB 3.1 Type-C male to Type-C male cable, 10G, 5A for use with the 4-Port, Acroname USB Type-C Switch and beyond.
1.5ft, USB 3.1 Type-C male to A male cable, 10G, 3A for use with the 4-Port, Acroname USB Type-C Switch and beyond.
Programmable software controlled USB hub with 2 host connections and 4 fast-charging (2.5A) device connections. Switch and control data, power and current limits separately. Boost USB signal levels to account for difficult interconnection environments. Rugged steel housing and ESD protected to 30kV.
Programmable, software-controlled, industrial USB 3.0 hub with 8 fast-charging (4A) ports, 2 host connections, and a dedicated port for control and monitoring. Control USB Hi-Speed, SuperSpeed data and power lines. Set current limit trip points for each port and monitor voltage and current on each port. Boost USB2 signal levels to account for difficult interconnection environments. Rugged steel housing and ESD protected to ±15kV (IEC61000-4-2 Level 4).
Software-controlled, bidirectional 4-channel USB-C port selector switch. Includes on-board USB signal redrivers for longer cables. Automate port switching, hot-plug and type-C connector flips. Monitor Vbus and Vconn voltage and current. Support for USB-PD and alt-modes. Rugged steel housing and ESD protected. Includes one 1.5ft USB-C male-to-male full-featured, e-marked cable, one 1.5ft USB-C to A male-to-male cable and one 1.5ft Acroname Universal Orientation Cable (UOC).
USB 3.1 Type-C to Type-C Coaxial cable, 10G, 5A for use with the 4-Port, Acroname USB Type-C Switch and beyond.
USB-C Universal Orientation Cable (UOC) is a specialized USB-C cable for use only with Acroname's programmable USB-C-Switch. The C38-USBC-UOC cable provides an orientation-agnostic USB-C connection required for USB-C-Switch software-based cable flip functionality.
The S79-USBHUB-3P NIST Calibration Certificate provides formal documentation that Acroname Inc. has used NIST-Traceble test equipment to verify that the Vbus voltage and current measurements are within the limits specificed in the Typical Performance Characteristics section of the product datasheet.
DIN rail mounting hardware compatible with most Acroname products including S77-USBHUB-2X4, S79-USBHUB-3P and S85-USBC-SWITCH
Acroname MTM-IO-Serial module features adjustable rail GPIO ports, high current drivers, software controlled USB 2.0 hub and serial UART ports, all controlled by BrainStem technology.