Products

Products

NIST Calibration Certificate (USBHub3c)

The USBHub3c NIST Calibration Certificate provides formal documentation that Acroname Inc. has used NIST-Traceble test equipment to verify that the voltage and current measurements are within the limits specificed in the Typical Performance Characteristics section of the product datasheet. One (1) business day processing or longer may be required.

$200.00
ControlRoom add-on feature
ControlRoom Feature

ControlRoom provides a real-time view of your system's connected USB devices once a licensed USBHub3+ is connected. ControlRoom helps identify and manage your USB peripherals, storage devices, and other USB-connected hardware. Combining ControlRoom with the USBHub3+ enables the ability to unplug-plug cycle USB devices without entering a room or reaching into physically challenging spaces to access cabling. Additional diagnostics include speed issues, connectivity issues, bad USB cables, and other performance metrics.

$200.00
USBHub3c 1 Year Extended Warranty
USBHub3c 1 Year Extended Warranty

Extended, limited warranty for USBHub3c (S99-USBHUB-3C-PRO, S99-USBHUB-3C-LAB) covering manufacturing defects.

$200.00
40-Pin EtherStem Module Kit
40-Pin EtherStem Module Kit

A kit containing a 40-pin EtherStem module, 40-pin mini breakout board and a USB A to mini B cable and an Ethernet cable; a $23 savings over buying everything separately. Easy to order and get started.

$175.00
40-Pin USBStem Module Kit
40-Pin USBStem Module Kit

A kit containing a 40-pin USBStem module, 40-pin mini breakout board board and a USB A to mini B cable; a $23 savings over buying everything separately. Order now and get started.

$175.00
40-Pin EtherStem Module
40-Pin EtherStem Module
EtherStem 1.0 module is a general purpose embedded I/O module with TCP/IP interfacing support.
$165.00
40-Pin USBStem Module
40-Pin USBStem Module

The 40-pin USBStem module is a general purpose embedded I/O module with a USB 2.0 interface.

$165.00
NIST Callibration Certificate (MTM-DAQ-2)

The National Institute of Standards and Technology (NIST) advances measurement science, standards, and technology for industries throughout the world. NIST certification means that the Acroname product you purchase and use has been tested against NIST standards and meets the exacting requirements required for safety and quality. One (1) business day processing or longer may be required.

$150.00
MTM-RCI-1 Ribbon Cable Interface
MTM Ribbon Cable Interface

ELEGANT CONNECTIONS: The S91-MTM-RCI-1 Ribbon Cable Interface connects non-MTM equipment into MTM-based systems. Bridge external test tools to an MTM test-point carrier board (TPCB) using wired ribbon cable, headers, or terminal blocks. 

$135.00
NIST Callibration Certificate (USBHub3+)

The S79-USBHUB-3P NIST Calibration Certificate provides formal documentation that Acroname Inc. has used NIST-Traceble test equipment to verify that the Vbus voltage and current measurements are within the limits specificed in the Typical Performance Characteristics section of the product datasheet. One (1) business day processing or longer may be required.

$125.00
USB-C-Switch 1 Year Extended Warranty

Extended limited warranty for USB-C-Switch covering manufacturing defects.

$100.00
USBHub3+ 1 Year Extended Warranty

Extended, limited warranty for USBHub3+ (S79-USBHUB-3P) covering manufacturing defects.

$100.00
USBHub3c Quick Charge Feature
USBHub3c Quick Charge Feature

Software package which enables Qualcomm Quick Charge (QC2, QC3) support on ports 0-5.

$100.00
USBHub3c Serial Control Feature
USBHub3c Serial Control Feature

A software add-on feature to enable control of the USBHub3c via RS232 serial interface on the external expansion header.

$100.00
Devantech dS378 8 x 16A Ethernet Relay Board
Devantech dS378 8 x 16A Ethernet Relay Board

The dS378 is an Ethernet connected relay module featuring 8 channels of 16Amp 250Vac relays. Each relay has both normally open (NO) and normally closed (NC) as well as the common available on three terminals. Create Peer to Peer control in just a few clicks with a powerful dScript programming language. 

$93.00
MTM-DAQ-2 1 Year Extended Warranty

Extended, limited warranty for MTM-DAQ-2 (S92-MTM-DAQ-2) covering manufacturing defects.

$85.00
MTM-IO-Serial 1 Year Extended Warranty

Extended, limited warranty for MTM-IO-Serial (S62-MTM-IO-SERIAL) covering manufacturing defects.

$80.00
Devantech dS3484 4x16A Ethernet Relay with Digital Switching I/Os
Devantech dS3484 4x16A Ethernet Relay with Digital Switching I/Os

The dS3484 Ethernet controlled relay board provides 8 digital switching I/O channels and 4 voltage-free contact relay outputs with a current rating of up to 16A each. Controlled over TCP/IP via Ethernet or USB for development.

$79.50
Devantech ETH008 Ethernet - 8 x 16A relay module
Devantech ETH008 Ethernet Relay Module (8x16A)

The ETH008 Ethernet relay board provides 8 voltage-free contact relay outputs with a current rating of up to 16A each. This module is controlled over TCP/IP via Ethernet and is powered via 12VDC supply, either regulated or unregulated.

$76.50
Devantech dS1242 2x16A Ethernet Relay with Digital Switching I/Os
Devantech dS1242 2x16A Ethernet Relay with Digital Switching I/Os

The dS1242 is an Ethernet connected relay module featuring 2 channels of 16Amp 250Vac relays. Each relay has both normally open (NO) and normally closed (NC) as well as the common available on three terminals.

$76.00
USBHub2x4 1 Year Extended Warranty

Extended, limited warranty for USBHub2x4 (S797-USBHUB-2X4) covering manufacturing defects.

$75.00
USB-C 40 Gbps Coaxial Universal Orientation Cable
USB-C 40 Gbps Coaxial Universal Orientation Cable 0.7 Meter EPR 240W

The USB-C Coaxial Universal Orientation Cable (UOC) enables automated testing of flipping USB-C connections. When used with the USB-C-Switch or USBHub3c, this cable provides an orientation-agnostic connection. It is built with low-loss coaxial wires for the USB SuperSpeed data lines to ensure the highest possible signal integrity in your USB-C test system. C67-USBC-UOC is a specialized USB-C UOC cable used for flip testing of USB-C end devices (cameras, flash drives, development boards) which short the USB 480Mbps A and B side D+/D- lines at the USB-C connector. Products which implement fully separated D+/D- connections for each side of the USB-C connector should use the C70-USB-UOC.

List price
$95.00
$70.00
USB-C 40 Gbps Coaxial Universal Orientation Cable 0.7 Meter EPR 240W (dual USB2)
USB-C 40 Gbps Coaxial Universal Orientation Cable 0.7 Meter EPR 240W (dual USB2)

The USB-C Coaxial Universal Orientation Cable (UOC) enables automated testing of flipping USB-C connections. When used with the USB-C-Switch or USBHub3c, this cable provides an orientation-agnostic connection. It is built with low-loss coaxial wires for the USB SuperSpeed data lines to ensure the highest possible signal integrity in your USB-C test system. C70-USBC-UOC is a specialized USB-C UOC cable used for flip testing of USB-C end devices (cameras, flash drives, development boards) which implement fully separate USB 480Mbps A and B side D+/D- lines at the USB-C connector. Products which short D+/D- connections for A and B side of the USB-C connector should use the C67-USBC-UOC.

$70.00
C46-USBC-UOC
USB-C Coaxial UOC Cable for 5Gbps devices

The USB-C Coaxial Universal Orientation Cable (UOC) enables automated testing of flipping USB-C connections. When used with the USB-C-Switch or USBHub3c, this cable provides an orientation-agnostic connection. It is built with low-loss coaxial wires for the USB SuperSpeed data lines to ensure the highest possible signal integrity in your USB-C test system. C46-USBC-UOC is a specialized USB-C UOC cable used for flip testing of USB-C end devices (cameras, flash drives, development boards) which short the USB 480Mbps A and B side D+/D- lines at the USB-C connector. Products which implement fully separated D+/D- connections for each side of the USB-C connector should use the C44-USBC-UOC.

$70.00