The MTM Power Module provides low voltage, highly stable, regulated DC power from 1.8VDC to 5.0VDC, with software controllable voltage and current limiting optimized for battery-powered device testing.
- MTM 1-Channel Power Module
Hokuyo UTM-30LX-EW scanning laser range finder with an extended sensing range to 30 meters. Interface is Ethernet and scanning rate is 25 milliseconds across a 270° range.
Hokuyo scanning laser range finder with USB 2.0 interface, 270˚ field of veiew, 0.25˚ angular resolution, 0.1 to 30m range, ±10mm accuracy, 1mm resolution, and a 40Hz scan rate.
Cross-platform USB to I2C interface adapter to connect any 100kHz I2C device or bus to a host PC.
- Devantech USB to I2C Adapter
The UST-20LX is a scanning laser range finder with a .02 to 20 meter range. The sensor's interface is Ethernet. Scanning rate is 25 milliseconds across a 270° range. A 12/24VDC power source is required.
Devantech self-powered USB to RS485 adapter with support for baud rates up to 250kbps, automatic bus turn-around, and buses up to 128 devices.
Sharp long range infrared distance sensor makes continuous distance readings and outputs an analog voltage proportional to a target's range. Working range of 100 cm to 550 cm (~3 ft to 18 ft). 5-pin JST connector and all wiring included.
Sharp infrared distance sensor makes continuous distance readings and returns a logic value corresponding to object detection within a pre-set range of 24 cm (9.45 in).
Hokuyo scanning laser range finder, USB 2.0 interface, 240° FOV, able to measure distances from 20 mm to 5.6 m (0.79 in to 18.37 ft).
This connector converts a serial or UART signal from TTL to RS-232 levels. Included are indicator LEDs for host serial power and TTL logic power.
- Serial Interface Connector
This kit combines the Acroname serial interface connector, extension cable, and a 1.82 m (6 ft) serial extension cable for interfacing your host to the BrainStem. This can also be used in other cases where you need to communicate with TTL devices from your computer.