The USBHub2x4 is a 4-port software-programmable 480Mbps (USB 2.0) hub that is designed for demanding industrial environments where advanced control and monitoring of USB ports is required. This is very useful in testing or development environments where standard “always-on” behavior of a consumer-grade USB hub is not desirable.

Acroname MTM-IO-Serial module features adjustable rail GPIO ports, high current drivers, software controlled USB 2.0 hub and serial UART ports, all controlled by BrainStem technology.

Software package which allows editing of the local Power Data Objects (PDOs).

Provides PD transaction logging for all PD communications on all ports of the USBHub3c

The LW24/C is an IP67 LiDAR sensor designed for applications where communication interfaces Serial and I2C or RS232 are required. 

The LW24/C is an IP67 LiDAR sensor designed for applications where communication interfaces Serial and I2C or RS232 are required.

ACCURATE ALTITUDES: The SF30/D laser measurement sensor provides real-time, accurate altitude (AGL) measurements for UAVs. The lightweight 36-gram design features a time-of-flight range of up to 200 meters (656 feet) with an update rate of up to 20K readings per second.

Valens USB Extender provides seamless extension of USB 2.0 data link and power for distances up to 100m over CAT6 ethernet cables. Ideal for conference room and data center where remote USB connections are needed up to 100m away. Connect and power peripherals on the device side at 5V or 12V using the standard USB-C connection or at 12V using the included DC power cable.

Provides software and API access to enable external load interfaces on the USBHub3c. Available for both Pro and Lab editions.

SOLID STATE: The MTM-Relay is a key component to automated manufacturing test systems that require switching of industrial control voltages. Features four software-controlled solid-state relays (SSR) that can handle up to 60V and 6ADC/RMS. 

Acroname's custom version of the highly regarded GST280A24-C6P is a reliable single-channel 24VDC, 280W power supply. The power supply is fitted with a 4 terminal 5.08mm pitch connector for direct connection to a USBHub3c. Recommended for powering USBHub3c in high power USB-C/PD power delivery applications.

The LightWare SF30/C is a high speed, light weight laser rangefinder for mapping and obstacle detection by robotic vehicles such as UAVs with a range up to 100m.  

FAST-RATE LASER: The LightWare SF20 B/50m and SF20 C/100m are fast-rate laser rangefinders designed to help drones record fast and accurate distance measurements. 

The LW20/C is a small form factor, 100-meter range, laser sensor in an IP67 enclosure suitable for small drones and self-driving vehicles, where weight, size and power consumption are critical. The LW20/C includes driver hardware and software to control a servo-driven LiDAR scanner for sense-and-avoid applications. 

PRECISE AND ACCURATE: The SF000/B 50m is an ultra-small and light laser rangefinder specifically designed for size and weight-constrained applications. Its Time-of-Flight system quickly produces precise and accurate distance and speed measurements. 

REDUCE MTM WIRING COMPLEXITIES: The MTM Development Board Kit enables development and testing of embedded and high-level programs with common MTM modules. 

ENERGY-CRITICAL: The SF23/B is a low-power LiDAR that can be used in energy-critical applications where batteries or solar cells are used. The SF23/B is tolerant to changes in background lighting conditions, wind, and noise.

Provides USBHub3c software and API access to override Vbus voltage set points and current limits. Used in testing a device's response to incorrect Vbus voltages after USB-PD negotiation.

SIMPLIFY INTERFACING: The MTM-Ether-Stem allows communication between host-based applications and any MTM module on the BrainStem bus. Designed for test direction, control, data collection, or loading reflex programs. 

CONTROL TEST ENVIRONMENTS through a wide-range of IO capabilities and enable communications between a host PC and any module on the BrainStem bus. 

HIGH POWER. HIGH CURRENT. The MTM Power Development Board allows high power and high current connections to quickly deploy MTM testers.  

FAST INTEGRATION: The MTM-DEV-2 Breakout Board is the quickest way to effectively integrate MTM instrumentation in your production tester or bench system. It allows wire-wraps or ribbon cables to directly attach to MTM modules for quick deployment of in-wire-wrapped testers. 

The dS2832 is an Ethernet connected relay module featuring 32 channels of 16Amp 250Vac relays. Each relay has both normally open (NO) and normally closed (NC) as well as the common available on three terminals. 8 flexible I/O channels with a choice of VFC, NPN, or 12-bit analog input.