Products

The dS2832 is an Ethernet connected relay module featuring 32 channels of 16Amp 250Vac relays. Each relay has both normally open (NO) and normally closed (NC) as well as the common available on three terminals. 8 flexible I/O channels with a choice of VFC, NPN, or 12-bit analog input. This option is for dS2832 without integrated snubbers. For applications switching inductive loads, please select the -SN variant with integrated snubbers or use an external snubber.

FAST INTEGRATION: The MTM-DEV-2 Breakout Board is the quickest way to effectively integrate MTM instrumentation in your production tester or bench system. It allows wire-wraps or ribbon cables to directly attach to MTM modules for quick deployment of in-wire-wrapped testers. 

SIMPLIFY INTERFACING: The MTM-Ether-Stem allows communication between host-based applications and any MTM module on the BrainStem bus. Designed for test direction, control, data collection, or loading reflex programs. 

CONTROL TEST ENVIRONMENTS through a wide-range of IO capabilities and enable communications between a host PC and any module on the BrainStem bus. 

HIGH POWER. HIGH CURRENT. The MTM Power Development Board allows high power and high current connections to quickly deploy MTM testers.  

Provides USBHub3c software and API access to override Vbus voltage set points and current limits. Used in testing a device's response to incorrect Vbus voltages after USB-PD negotiation.

Provides USBHub3c software and API access to override Vbus voltage set points and current limits. Used in testing a device's response to incorrect Vbus voltages after USB-PD negotiation.

REDUCE MTM WIRING COMPLEXITIES: The MTM Development Board Kit enables development and testing of embedded and high-level programs with common MTM modules. 

SOLID STATE: The MTM-Relay is a key component to automated manufacturing test systems that require switching of industrial control voltages. Features four software-controlled solid-state relays (SSR) that can handle up to 60V and 6ADC/RMS. 

Acroname's custom version of the highly regarded GST280A24-C6P is a reliable single-channel 24VDC, 280W power supply. The power supply is fitted with a 4 terminal 5.08mm pitch connector for direct connection to a USBHub3c. Recommended for powering USBHub3c in high power USB-C/PD power delivery applications.

Provides software and API access to enable external load interfaces on the USBHub3c. Available for both Pro and Lab editions.

The Valens R489 USB and Power Extender, co-branded with Logitech, delivers seamless extension of USB 2.0 data link and power for distances up to 100m over CAT6 ethernet cables. Ideal for conference room and data center where remote USB connections are needed up to 100m away. Connect and power peripherals on the device side at 5V or 12V using the standard USB-C connection or at 12V using the included DC power cable.

Software package which allows editing of the local Power Data Objects (PDOs).

Provides PD transaction logging for all PD communications on all ports of the USBHub3c

Provides PD transaction logging for all PD communications through the USB-C-Switch Pro

Provides PD transaction logging for all PD communications on all ports of the USBExt3c

Software package which allows editing of the local Power Data Objects (PDOs).

Acroname MTM-IO-Serial module features adjustable rail GPIO ports, high current drivers, software controlled USB 2.0 hub and serial UART ports, all controlled by BrainStem technology.

The USBHub2x4 is a 4-port software-programmable 480Mbps (USB 2.0) hub that is designed for demanding industrial environments where advanced control and monitoring of USB ports is required. This is very useful in testing or development environments where standard “always-on” behavior of a consumer-grade USB hub is not desirable.

EXCELS AT POWER:  The MTM-PM11 1: Channel DC Power Module excels at powering devices that need stable power under large transient loads during manufacturing and R&D testing. Optimized for devices using LiPo or similar batteries. Accurate voltage, temperature and current measurements can be made through the powerful and cross-platform BrainStem API.

LDC480 is a reliable single-channel 24VDC, 480W power supply that is compact and mountable. Recommended for powering USBHub3c in high power USB-C/PD power delivery applications.

PRECISION ANALOG MEASUREMENTS: The MTM 16-Channel MTM-DAQ-2 Data Acquisition (DAQ) Module is engineered for precision measurements of analog voltages in manufacturing or R&D testing. 

The USBExt3c (single) is a 1:1 USB-C / Power Delivery hub, giving developers and engineers full control of USB-C behaviors to validate, control, and test the limits of devices built on the Power Delivery and USB-C specification.

Automate port switching, hot-plug & type-C connector flips. Monitor Vbus & Vconn voltage & current.