Acroname MTM-IO-Serial module features adjustable rail GPIO ports, high current drivers, software controlled USB 2.0 hub and serial UART ports, all controlled by BrainStem technology.

Acroname MTM-IO-Serial module features adjustable rail GPIO ports, high current drivers, software controlled USB 2.0 hub and serial UART ports, all controlled by BrainStem technology.

Acroname MTM-IO-Serial module features adjustable rail GPIO ports, high current drivers, software controlled USB 2.0 hub and serial UART ports, all controlled by BrainStem technology.

The dS1242 is an Ethernet connected relay module featuring 2 channels of 16Amp 250Vac relays. Each relay has both normally open (NO) and normally closed (NC) as well as the common available on three terminals.

This Devantech USB relay board provides 6 voltage-free contact relay outputs with a current rating of up to 16A each. Powered and controlled from any standard USB bus.

Acroname MTM-IO-Serial module features adjustable rail GPIO ports, high current drivers, software controlled USB 2.0 hub and serial UART ports, all controlled by BrainStem technology.

The ETH002-B Ethernet relay board has 2 voltage-free contact SPCO relay outputs with a current rating of up to 16A each, all controlled over TCP/IP via Ethernet. It’s powered via a 12VDC supply, which can be either regulated or unrelated, and the 2.1mm DC input jack has a positive core polarity. 

This Devantech 8-channel USB relay module is both powered and controlled by a standard USB bus hub. It uses relays with premium ultra-low power 50mW coil types, which means that the board’s consumption of current is less than 100mA, even with all the relays on, for excellent energy efficiency.

Acroname MTM-IO-Serial module features adjustable rail GPIO ports, high current drivers, software controlled USB 2.0 hub and serial UART ports, all controlled by BrainStem technology.

Extended, limited warranty for MTM-Relay (S78-MTM-RELAY) covering manufacturing defects.

Case for Devantech d2832 Ethernet relay board. Includes mounting holes for fixing to a wall or back panel. This precision snap together case includes screws for mounting the dS2832 module.

Supplied as a case only, the dS2832 module should be ordered separately.

Powered and Controlled from the USB bus.

Relays - 4 with integrated snubbing of the normally open terminals
Power - Powered from standard USB bus 
Control interface - USB with a mini B connector
Relay current - Up to 16Amp @24vdc or 250vac 
Connections - Screw Terminals for N/O N/C and Common contacts.

Acroname MTM-IO-Serial module features adjustable rail GPIO ports, high current drivers, software controlled USB 2.0 hub and serial UART ports, all controlled by BrainStem technology.

Acroname MTM-IO-Serial module features adjustable rail GPIO ports, high current drivers, software controlled USB 2.0 hub and serial UART ports, all controlled by BrainStem technology.

Extended, limited warranty for MTM-USBStem (S69-MTM-USBSTEM) covering manufacturing defects.

Acroname MTM-IO-Serial module features adjustable rail GPIO ports, high current drivers, software controlled USB 2.0 hub and serial UART ports, all controlled by BrainStem technology.

This Devantech USB relay board provides 2 voltage-free contact relay outputs with a current rating of up to 16A each. Powered and controlled from any standard USB bus, does not require any additional power. This option includes integrated snubbers installed for inductive load applications.

Acroname MTM-IO-Serial module features adjustable rail GPIO ports, high current drivers, software controlled USB 2.0 hub and serial UART ports, all controlled by BrainStem technology.

Acroname MTM-IO-Serial module features adjustable rail GPIO ports, high current drivers, software controlled USB 2.0 hub and serial UART ports, all controlled by BrainStem technology.

This breakout board provides easy access to the capabilities of Acroname 40-pin BrainStem, and is perfect for those looking to get started with the BrainStem. This breakout board can be powered from USB, ensuring a portable and easy-to-use development platform for 40-pin BrainStem.

Case for Devantech dS378 Ethernet relay board. Includes mounting holes for fixing to a wall or back panel. This precision snap together case includes screws for mounting the dS378 module.

Supplied as a case only, the dS378 module should be ordered separately.

Used for connecting external electronic loads to the USBHub3c for VBUS load testing. It features separate screw terminals for VBUS passthrough from each USB Type-C port (0 through 5). While this board provides a physical wiring interface to access each VBUS channel, the USBHub3c External Load Feature is required to enable VBUS outputs on the USBHub3c. Included with purchase of a USBHub3c with External Load add-on feature.

Acroname MTM-IO-Serial module features adjustable rail GPIO ports, high current drivers, software controlled USB 2.0 hub and serial UART ports, all controlled by BrainStem technology.

Acroname MTM-IO-Serial module features adjustable rail GPIO ports, high current drivers, software controlled USB 2.0 hub and serial UART ports, all controlled by BrainStem technology.