The USB-C Coaxial Universal Orientation Cable (UOC) enables automated testing of flipping USB-C connections. When used with the USB-C-Switch or USBHub3c, this cable provides an orientation-agnostic connection. It is built with low-loss coaxial wires for the USB SuperSpeed data lines to ensure the highest possible signal integrity in your USB-C test system. C70-USBC-UOC is a specialized USB-C UOC cable used for flip testing of USB-C end devices (cameras, flash drives, development boards) which implement fully separate USB 480Mbps A and B side D+/D- lines at the USB-C connector. Products which short D+/D- connections for A and B side of the USB-C connector should use the C67-USBC-UOC.

This Devantech USB relay board provides 8 voltage-free contact latching relay outputs with a current rating of up to 16A each. Controlled and powered from any standard USB bus, no separate power supply is needed. Latching relays stay in their last position when power is removed.

This Devantech USB relay board provides 6 voltage-free contact relay outputs with a current rating of up to 16A each. Powered and controlled from any standard USB bus.

Case for Devantech d2832 Ethernet relay board. Includes mounting holes for fixing to a wall or back panel. This precision snap together case includes screws for mounting the dS2832 module.

Supplied as a case only, the dS2832 module should be ordered separately.

This Devantech 8-channel USB relay module is both powered and controlled by a standard USB bus hub. It uses relays with premium ultra-low power 50mW coil types, which means that the board’s consumption of current is less than 100mA, even with all the relays on, for excellent energy efficiency.

The ETH002 Ethernet relay board has 2 voltage-free contact SPCO relay outputs with a current rating of up to 16A each, all controlled over TCP/IP via Ethernet. It’s powered via a 12VDC supply, which can be either regulated or unrelated, and the 2.1mm DC input jack has a positive core polarity. 

Standard 100W USB-C/Power Delivery (PD) AC adapter with one captive USB-C Power Delivery output port. Supports 100-240VAC 50-60Hz input and multiple USB-C/PD power output profiles, up to 20V at 5A. Output is provided by a captive USB-C (69") cable, which supports USB power only.

Extended, limited warranty for MTM-Relay (S78-MTM-RELAY) covering manufacturing defects.

Powered and Controlled from the USB bus.

Relays - 4 with integrated snubbing of the normally open terminals
Power - Powered from standard USB bus 
Control interface - USB with a mini B connector
Relay current - Up to 16Amp @24vdc or 250vac 
Connections - Screw Terminals for N/O N/C and Common contacts.

The SF000 Breakout Board connects the LightWare SF000/B (50m) to various platforms, including: 

* Pixhawk Serial & I2C Connectivity

* Arduino Serial & I2C Connectivity

* Raspberry Pi Serial & I2C Connectivity

Precision-machined bracket mounts a LightWare SF10, SF11 or SF30 series laser rangefinder to your project. Made of high-grade aluminum, it conveniently positions and protects the rangefinder in both stationary and mobile applications. Assembly is quick and easy and all necessary mounting hardware is included.

The USB-RLY82 USB controlled relay board provides 2 voltage-free contact relay outputs with a current rating of up to 16A each. Powered and controlled from the USB bus, this board features premium ultra low power 50mW coils.

SEAMLESS INTEGRATION: The LightWare SF000 USB Connector allows for easy connectivity of the LightWare SF000/B 50 m to a computer.  

Desktop-style AC to DC power adapter with 12VDC up to 5A (60W) output. Supports universal 100-240VAC input. Recommended for use with Acroname programmable USB hubs.

Extended, limited warranty for MTM-USBStem (S69-MTM-USBSTEM) covering manufacturing defects.

This breakout board provides easy access to the capabilities of Acroname 40-pin BrainStem, and is perfect for those looking to get started with the BrainStem. This breakout board can be powered from USB, ensuring a portable and easy-to-use development platform for 40-pin BrainStem.

USB-C male to male cable with single locking thumbsrews on one-side for securing the connection. Cable is 1 meter (3 feet) long and is e-marked to support USB 40Gbps data speeds and 5A fast charging.

1M USB-C® to USB-C® USB4® coax cable supporting 40 Gbps,  Extended Power Range (EPR) 240W (48V 5A)

This Devantech USB relay board provides 2 voltage-free contact relay outputs with a current rating of up to 16A each. Powered and controlled from any standard USB bus, does not require any additional power.

The Devantech SRF10 is an ultrasonic rangefinder with a I2C interface that combines a self-contained design with minimal power draw. Able to measure in both centimeters and inches, the ranging module can measure from 3cm to 600cm (1.2 inches to 19 feet).

Case for Devantech dS378 Ethernet relay board. Includes mounting holes for fixing to a wall or back panel. This precision snap together case includes screws for mounting the dS378 module.

Supplied as a case only, the dS378 module should be ordered separately.

Used for connecting external electronic loads to the USBHub3c for VBUS load testing. It features separate screw terminals for VBUS passthrough from each USB Type-C port (0 through 5). While this board provides a physical wiring interface to access each VBUS channel, the USBHub3c External Load Feature is required to enable VBUS outputs on the USBHub3c. Included with purchase of a USBHub3c with External Load add-on feature.

Used for connecting a serial RS-232 interface to the control the USBHub3c through the expansion interface connector. Screw terminals are provided for the RS-232 interface. While this board provides for wiring connections, a host machine external to the USBHub3c is required for this control interface. The Serial Control software feature for USBHub3c is required for this interface board to function. Included with purchase of a USBHub3c with Serial Control add-on feature.