- 1 of 2
- next ›
Programmable, software-controlled, bidirectional 4-port USB-C switch supporting USB 3.1 Gen 2 data rates up to 10Gbps. Automate switching, hot-plug and type-C connector flips. Monitor Vbus and Vconn voltage and current. Support for USB, PD and alt-modes.
Rugged steel housing and ESD protected.
Includes one 1.5ft USB-C male-to-male full-featured, e-marked cable and one 1.5ft USB-C to A male-to-male.
Programmable, software-controlled, industrial USB 3.0 hub with 8 fast-charging (4A) ports, 2 host connections, and a dedicated port for control and monitoring. Control USB Hi-Speed, SuperSpeed data and power lines. Set current limit trip points for each port and monitor voltage and current on each port. Boost USB2 signal levels to account for difficult interconnection environments. Rugged steel housing and ESD protected to ±15kV (IEC61000-4-2 Level 4).
Programmable software controlled USB hub with 2 host connections and 4 fast-charging (2.5A) device connections. Switch and control data, power and current limits separately. Boost USB signal levels to account for difficult interconnection environments. Rugged steel housing and ESD protected to 30kV.
Cross-platform USB to I2C interface adapter to connect any 100kHz I2C device or bus to a host PC.
- Devantech USB to I2C Adapter
Devantech self-powered USB to RS485 adapter with support for baud rates up to 250kbps, automatic bus turn-around, and buses up to 128 devices.
This connector converts a serial or UART signal from TTL to RS-232 levels. Included are indicator LEDs for host serial power and TTL logic power.
- Serial Interface Connector
This kit combines the Acroname serial interface connector, extension cable, and a 1.82 m (6 ft) serial extension cable for interfacing your host to the BrainStem. This can also be used in other cases where you need to communicate with TTL devices from your computer.
This serial adapter bridges UART serial data to USB as a virtual serial port. The connector allows you to communicate with a device that requires serial data at common serial baud rates.
- USB Serial Converter
This kit combines the Acroname V3.0 USB Serial interface connector, extension cable and a 1.82 meter (6ft) USB 2.0 A-to-mini-B extension cable for interfacing a host computer to a UART serial device.
A specialized multiplexer that uses R/C servo signals as a basis for input control and output signals. The RxMux allows control of 8 R/C servos from two different input signal sources. Signal sources can come from R/C receivers, autopilots, or microcontrollers that are connected to the RxMux input pins. The RxMux is perfect for autonomous control of UAVs, drove and other remote control systems.
Adapter for communicating to I2C, SPI and serial buses from a USB port. Output pins may alternatively be configured as general purpose digital input/output and analog inputs.