Products

TeraRanger Evo 60m (with USB interface) is an LED-based time-of-flight (TOF) distance sensor, touting calibrated distance readings in millimeters with a range up to 60m, all in a very small and lightweight package. Ideal for eye-safe applications, EVO's LED technology utilizes a Field of View (FoV) to measure distance within the FoV area.

The SF20/B is a small form factor, 50 meter range, laser distance sensor with fast, accurate measurements. The SF20/B includes driver hardware and software to control a servo driven LiDAR scanner for sense-and-avoid applications.

TeraRanger Evo 600Hz (with a USB interface) is a LED-based time-of-flight (TOF) distance sensor, touts 600 readings per second and calibrated distance readings in millimeters with a range up to 8m, all in a very small and lightweight package. Ideal for eye-safe applications, EVO's LED technology utilizes a Field of View (FoV) to measure distance within the FoV area.

The OPS241-A is a complete short-range radar (SRR) sensor on a single board. It provides motion detection, speed, and direction reporting for objects from 1-25m (3-80 ft) within its field of view. All RADAR signal processing is done on board and a simple API reports the processed data.

Open frame version of the LW20, the SF20 is a small form factor, 50 meter range laser sensor suitable as original equipment in drones and other products where fast, accurate distance measurement is required.

The SF11/B is a medium range (0-50m), light-weight, laser altimeter. The SF11/B includes digital (serial and I2C) and analog (12 bit) outputs along with a micro USB configuration port. Complete with power, interface and micro USB cables. It is directly compatible with Pixhawk flight controllers.

The UTM-30LX-EW scanning laser rangefinder is a small, accurate, high-speed device for outdoor obstacle detection. This model uses Ethernet interface for communication and can obtain measurement data in a 270° field of view up to a distance of 30 meters with millimeter resolution. It uses multi-echo technology in order to obtain usable measurement data in adverse weather conditions. 

The UTM-30LX scanning laser rangefinder is a low power, small, accurate, high-speed device for obstacle detection. This model uses USB 2.0 interface for communication and can obtain measurement data in a 270° field of view up to a distance of 30 meters with millimeter resolution. Due to the internal filtering and protective housing, this device can be used outdoors and is less susceptible to ambient light.

The UST-20LX scanning laser rangefinder is a low power, small, accurate, high-speed device for obstacle detection. This model uses Ethernet interface for communication and can obtain measurement data in a 270° field of view up to a distance of 20 meters with millimeter resolution.

Sharp long range infrared distance sensor makes continuous distance readings and outputs an analog voltage proportional to a target's range. Working range of 100 cm to 550 cm (~3 ft to 18 ft). 5-pin JST connector and all wiring included.

Sharp infrared distance sensor makes continuous distance readings and returns a logic value corresponding to object detection within a pre-set range of 24 cm (9.45 in).

The URG-04LX-UG01 scanning laser rangefinder is a low power, small, accurate, high-speed device for obstacle detection. Using the USB interface for power and communication, this unit can obtain measurement data in a 240° field of view up to a distance of 4 meters.

The URG-04LX scanning laser rangefinder is a low power, small, accurate, high-speed device for obstacle detection. This model includes both RS232 and USB interfaces for communication and can obtain measurement data 240° field of view up to a distance of 5.6 meters with millimeter resolution.

The UST-05LA scanning laser rangefinder is a low power, small, accurate, high-speed device for obstacle detection. This model includes both USB and RS422 interface for communication and setting area configurations with three output zones. It can obtain measurement data in a 270º field of view up to a distance of 5 meters with millimeter resolution.

The UST-05LN scanning laser rangefinder is a small, accurate, high-speed device for obstacle detection. With a USB interface, the device can be easily programmed to set three area detection output zones with real-time detection in a 270º field of view up to a distance of 5 meters with millimeter resolution.

LightWare 3D printed, ABS plastic mounting bracket for their LW20 sensor with 3 x M2 mounting holes.  

Sharp infrared distance sensor makes continuous distance readings and outputs an analog voltage proportional to an objects range. Working range of 1.5″ to 12″ (4 cm to 30 cm). Kit includes wires and connector. This model is a direct replacement for the discontinued Sharp GP2D120.  

The SRF04 is a single transducer ultrasonic rangefinder with a 2-pin Serial interface. The SRF04 returns a pulse proportional to distance that can measure from approx 3cm (1.2in) to 300cm (9.8ft).

The SRF05 is a single transducer ultrasonic rangefinder with either a single pin for both trigger and echo, or separate trigger and echo pins.The SRF05 can be a drop-in replacement for the SRF04. The SRF05 returns a pulse proportional to distance that can measure from approx 1cm (0.4in) to 400cm (13ft).

The UST-10LX scanning laser rangefinder is a low power, small, accurate, high-speed device for obstacle detection. This model uses Ethernet interface for communication and can obtain measurement data in a 270° field of view up to a distance of 10 meters with millimeter resolution.

The SRF10 is a ultrasonic rangefinder with an I2C interface. The SRF10 can measure in cm or Inches from 3cm (1.2in) to 600cm (19ft).

The SRF02 is a single transducer ultrasonic rangefinder with both I2C and Serial interfaces. The SRF02 can measure in cm or Inches from approx 15cm (6in) to 600cm (19ft).

The SRF01 is a single transducer ultrasonic rangefinder in a very small footprint PCB with a single pin Serial interface. The SRF01 can measure in cm or Inches. In standard mode the SRF01 measures from approx 18cm (7in) to 600cm (19ft). In Advanced mode it is possible for the SRF01 to measure range all the way down to zero.

The LightWare SF30/B is a high speed, light weight laser rangefinder for mapping and obstacle detection by robotic vehicles such as UAVs with a range up to 50m.