- 1 of 4
- next ›
The LightWare LW20 is a very small form factor, 100m range laser sensor in an IP67 enclosure suitable for small drones and self-driving vehicles.
Open frame version of the LW20, the SF20 is a small form factor, 100 meter range laser sensor suitable as original equipment in drones and other products where fast, accurate distance measurement is required.
- LightWare SF20 (100m)
The LightWare SF11/C is a long range (0-120m), light weight laser altimeter designed for above-ground-level measurement from UAVs (multi-copter or fixed wing). It is directly compatible with Pixhawk flight controllers.
- LightWare SF11/C (120 meter)
. Totally silent, zero moving parts, greater efficiency and reliability, the Tower is capable of Simultaneous Localization and Mapping (SLAM) and collision avoidance on fast-moving ground and airborne robots.
- TeraRanger Tower
The LightWare SF30/B is a high speed, light weight laser rangefinder for mapping and obstacle detection by robotic vehicles such as UAVs with a range up to 50m.
The UST-10LX is a scanning laser range finder with a .02 to 10 meter range. The sensor's interface is Ethernet. Scanning rate is 25 milliseconds across a 270° range. A 12/24VDC power source is required.
TeraRanger One is a lightweight, high-performance distance measurement sensor based on infrared time-of-flight (ToF) technology. Type A is best for use in indoor environments.
- TeraRanger One
The LightWare SF10/B is a compact, lightweight laser altimeter for above-ground-level altitude measurement from small fixed wing or multi-rotor craft, with a range up to 50m.
Hokuyo UTM-30LX-EW scanning laser range finder with an extended sensing range to 30 meters. Interface is Ethernet and scanning rate is 25 milliseconds across a 270° range.
Hokuyo scanning laser range finder with USB 2.0 interface, 270˚ field of veiew, 0.25˚ angular resolution, 0.1 to 30m range, ±10mm accuracy, 1mm resolution, and a 40Hz scan rate.
The UST-20LX is a scanning laser range finder with a .02 to 20 meter range. The sensor's interface is Ethernet. Scanning rate is 25 milliseconds across a 270° range. A 12/24VDC power source is required.
Sharp long range infrared distance sensor makes continuous distance readings and outputs an analog voltage proportional to a target's range. Working range of 100 cm to 550 cm (~3 ft to 18 ft). Wires and connector included.