Products

Programmable, software-controlled, industrial USB 3.0 hub with 8 fast-charging (4A) ports, 2 host connections, and a dedicated port for control and monitoring. Control USB Hi-Speed, SuperSpeed data and power lines. Set current limit trip points for each port and monitor voltage and current on each port. Boost USB2 signal levels to account for difficult interconnection environments. Rugged steel housing and ESD protected to ±15kV (IEC61000-4-2 Level 4).

The LightWare LW20 is a very small form factor, 100m range laser sensor in an IP67 enclosure suitable for small drones and self-driving vehicles. 

Open frame version of the LW20, the SF20 is a small form factor, 100 meter range laser sensor suitable as original equipment in drones and other products where fast, accurate distance measurement is required.

Programmable software controlled USB hub with 2 host connections and 4 fast-charging (2.5A) device connections. Switch and control data, power and current limits separately. Boost USB signal levels to account for difficult interconnection environments. Rugged steel housing and ESD protected to 30kV.

Get everything you need to evaluate MTM and develop your next functional test system with Acroname's MTM Evaluation Kit. The MTM Evaluation Kit includes: one MTM Development Board, one MTM USBStem Module, one MTM 1 Channel Power Module, one MTM IO Serial Module, one AC/DC 12V/5A power supply and one USB A to mini-B cable.

Get up and running right out of the box with MTM on your functional test project. The MTM Starter Kit includes everything you need to start: one MTM Development Board, one MTM USBStem Module, one MTM 1 Channel Power Module, one AC/DC 12V/5A power supply and one USB A to mini-B cable.

The LightWare SF11/C is a long range (0-120m), light weight laser altimeter designed for above-ground-level measurement from UAVs (multi-copter or fixed wing).  It is directly compatible with Pixhawk flight controllers.  

The MTM Power Module provides low voltage, highly stable, regulated DC power from 1.8VDC to 5.0VDC, with software controllable voltage and current limiting optimized for battery-powered device testing.

The UST-10LX is a scanning laser range finder with a .02 to 10 meter range.  The sensor's interface is Ethernet.  Scanning rate is 25 milliseconds across a 270° range.  A 12/24VDC power source is required. 

Hokuyo UTM-30LX-EW scanning laser range finder with an extended sensing range to 30 meters. Interface is Ethernet and scanning rate is 25 milliseconds across a 270° range.

Acroname MTM-Relay module with four high power (60V, 6A_DC) optically isolated solid-state relays (SSR), GPIO ports and serial communcations channels (UART and I2C), all controlled by BrainStem technology.

TeraRanger One is a lightweight, high-performance distance measurement sensor based on infrared time-of-flight (ToF) technology. Type A is best for use in indoor environments.