Get everything you need to evaluate MTM and develop your next functional test system with Acroname's MTM Evaluation Kit. The MTM Evaluation Kit includes: one MTM Development Board, one MTM USBStem Module, one MTM 1 Channel Power Module, one MTM IO Serial Module, one AC/DC 12V/5A power supply and one USB A to mini-B cable.
- MTM Evaluation Kit
Get up and running right out of the box with MTM on your functional test project. The MTM Starter Kit includes everything you need to start: one MTM Development Board, one MTM USBStem Module, one MTM 1 Channel Power Module, one AC/DC 12V/5A power supply and one USB A to mini-B cable.
- MTM Starter Kit
Acroname MTM-IO-Serial module features adjustable rail GPIO ports, high current drivers, software controlled USB 2.0 hub and serial UART ports, all controlled by BrainStem technology.
Acroname MTM-Relay module with four high power (60V, 6ADC) optically isolated solid-state relays (SSR), GPIO ports and serial communcations channels (UART and I2C), all controlled by BrainStem technology.
The MTM Power Module provides low voltage, highly stable, regulated DC power from 1.8VDC to 5.0VDC, with software controllable voltage and current limiting optimized for battery-powered device testing.
The MTM-EtherStem module is a TCP/IP Ethernet link that allows communication between a host based application and any module on the BrainStem bus. It features a wide range of IO, making it ideal for interfacing with various hardware in a test environment.
The MTM-USBStem link module features a wide range of IO capabilities making this an ideal module for controlling test environments. This module features a USB link, enabling communication between a host PC and any module on the BrainStem bus.
The MTM system is designed to reduce the wiring complexity of manufacturing test systems. S73-MTM-DEV is a breakout board designed for development and test of embedded and high-level programs with common MTM modules. This kit includes all necessary cables to get started right out of the box.
The MTM-DAQ-1 data acquisition (DAQ) module provides 14 channels of single-ended analog inputs and 2-channels of bi-polar differential inputs at 16-bit resolution. Also included are two analog output (DAC) channels at 12-bit resolution. The MTM-DAQ-1 is optimized for precision analog measurements in manufacturing test, with selectable ranges from +/-64mV to +/-10.24V.
- MTM Analog IO Module
MTM-DEV-2 is a breakout board for MTM systems, which allows wire-wraps or ribbon cables to be directly attached to MTM modules for quick deployment of MTM in wire-wrapped testers.
MTM-RCI-1 is a wiring adapter used to adapt external equipment to wireless MTM test solutions. Using MTM-RCI-1, customers can bridge external test tools to an MTM test point carrier board (TPCB) using wired ribbon cable, headers or terminal blocks.