- 1 of 2
- next ›
USBHub3+ is a 9-port USB 5Gbps hub with 2 host connections with a rugged steel housing, ESD protected design, and nearly unlimited power output.
Everything needed to setup the connections required for the Android Auto connectivity validation and certification test. Combined with software from Google, this package has all the hardware needed to get started with Android Auto testing: the redriver model USB-C-Switch, four (4) 1.5ft USB-C to C e-marked cables, and one 1.5ft USB-C to A cable.
LDC480 is a reliable single-channel 24VDC, 480W power supply that is compact and mountable. Recommended for powering USBHub3c in high power USB-C/PD power delivery applications.
The USBHub2x4 is a 4-port software-programmable 480Mbps (USB 2.0) hub that is designed for demanding industrial environments where advanced control and monitoring of USB ports is required. This is very useful in testing or development environments where standard “always-on” behavior of a consumer-grade USB hub is not desirable.
Software package which allows editing of the local Power Data Objects (PDOs).
Provides PD transaction logging for all PD communications on all ports of the USBHub3c
Acroname's custom version of the highly regarded GST280A24-C6P is a reliable single-channel 24VDC, 280W power supply. The power supply is fitted with a 4 terminal 5.08mm pitch connector for direct connection to a USBHub3c. Recommended for powering USBHub3c in high power USB-C/PD power delivery applications.
Provides software and API access to enable external load interaces on the USBHub3c. Available for both Pro and Lab editions.
Provides USBHub3c software and API access to override Vbus voltage set points and current limits. Used in testing a device's response to incorrect Vbus voltages after USB-PD negotiation.
Extended, limited warranty for USBHub3c (S99-USBHUB-3C-PRO, S99-USBHUB-3C-LAB) covering manufacturing defects.
The USBHub3c NIST Calibration Certificate provides formal documentation that Acroname Inc. has used NIST-Traceble test equipment to verify that the voltage and current measurements are within the limits specificed in the Typical Performance Characteristics section of the product datasheet.
The S79-USBHUB-3P NIST Calibration Certificate provides formal documentation that Acroname Inc. has used NIST-Traceble test equipment to verify that the Vbus voltage and current measurements are within the limits specificed in the Typical Performance Characteristics section of the product datasheet.
Extended, limited warranty for USBHub3+ (S79-USBHUB-3P) covering manufacturing defects.
A software license to enable control of the USBHub3c via RS232 serial interface on the external expansion header.
Extended limited warranty for USB-C-Switch covering manufacturing defects.
Software package which enables Qualcomm Quick Charge (QC2, QC3) support on ports 0-5.
Extended, limited warranty for USBHub2x4 (S797-USBHUB-2X4) covering manufacturing defects.
The USB-C Coaxial Universal Orientation Cable (UOC) enables automated testing of flipping USB-C connections. When used with the USB-C-Switch or USBHub3c, this cable provides an orientation-agnostic connection. It is built with low-loss coaxial wires for the USB SuperSpeed data lines to ensure the highest possible signal integrity in your USB-C test system. C46-USBC-UOC is a specialized USB-C UOC cable used for flip testing of USB-C end devices (cameras, flash drives, development boards) which short the USB 5Gbps A and B side D+/D- lines at the USB-C connector. Products which implement fully separated D+/D- connections for each side of the USB-C connector should use the C44-USBC-UOC.
The USB-C Coaxial Universal Orientation Cable (UOC) enables automated testing of flipping USB-C connections when used with the USB-C-Switch, USBHub3c, or other USB-C flippable devices by providing an orientation-agnostic connection.
USB-C to USB-C USB4 (40Gbps) cable with coaxial SuperSpeed lines, support for 5A charging. Ideal for use with the Acroname USB-C-Switch and the USBHub3c.
Standard 100W USB-C/PD AC adapter with one USB-C Power Delivery output port. Supports 100-240VAC input and multiple PD power output profiles, up to 20V at 5A. Includes one (1) USB C-C cable which supports USB power only.
USB-C male to male cable with single locking thumbsrews on both sides for securing the connection. Cable is 1 meter (3 feet) long and support USB3.2 Gen2 10Gbps data speeds and 5A fast charging, including the eMarker.